Husqvarna 327P4, 327P5X-series manual Fuelling, Mixing

Page 19

FUEL HANDLING

Mixing

•Always mix the petrol and oil in a clean container intended for fuel.

•Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol.

•Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

 

!

WARNING! The catalytic converter

 

muffler gets very hot during and after

 

 

 

 

use. This also applies during idling. Be

 

 

aware of the fire hazard, especially when

 

 

working near flammable substances and/

 

 

or vapours.

 

 

 

Fuelling

WARNING! Taking the following

!precautions, will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

•Always use a fuel container with an anti-spill valve.

•Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

•Ensure that the fuel is well mixed by shaking the container before filling the tank.

English – 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 327P4 327P5X-series Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentVibration damping system Stop switchMuffler Cutting equipment Quick release Balance Flex harnessOnly use cutting equipment recommended by us Specification of bar and saw chain Sharpening your chain and adjusting raker clearanceChain General Safety Precautions Tensioning the chain Checking chain lubrication Adjusting chain lubricationLubricating cutting equipment Filling with chain oilMay increase the risk of accidents Checking wear on cutting equipment ChainWhat to do if lubrication does not work Chain drive sprocketFitting the bar and chain AssemblyAdjusting the harness Fitting the cutting headFitting the impact guard AssemblyFilling with oil Assembling and dismantling the two-piece shaftAssembly of the saw attachment Fuel Handling Fuel safetyFuel Mixing FuellingStarting Starting and StoppingCheck before starting Starting and stoppingStopping General working instructions Safety instructions regarding the surroundingsSafety instructions while working Working TechniquesBasic working techniques Safety instructions after completing workWithout having the cutting attachment in full view Carburettor MaintenanceHigh speed jet H Fine adjustment of the idle speed TCorrectly adjusted carburettor Low speed jet LIs damaged it should be replaced MufflerCooling system Spark plugOiling the air filter Cleaning the air filterTwo-piece shaft Air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataEC-declaration of conformity Applies to Europe only Approved accessories Art No Use withBar and chain combinations Page Page Page Page 1150991-26

327P5X-series, 327P4 specifications

The Husqvarna 327P4 and 327P5X series are advanced professional pole saws designed for efficiency and ease of use in demanding applications. With their innovative features and robust construction, these models stand out in the market, catering to a wide range of tree care and landscaping needs.

One of the defining characteristics of the Husqvarna 327P4 and 327P5X series is their powerful engines. Equipped with a high-performance X-Torq engine, these pole saws deliver increased power output while significantly reducing fuel consumption and emissions. This technology not only enhances performance but also aligns with environmental standards, making these tools a sustainable choice for professionals in the field.

The ergonomic design of the pole saws ensures that users can operate them comfortably during extended periods. The lightweight construction, combined with an optimal weight balance, minimizes user fatigue. Additionally, the adjustable harness offers greater control, allowing operators to manage the saw with precision and ease, even at greater heights.

Both models feature Husqvarna's unique Smart Start system, which allows for hassle-free starting with minimal effort. This is particularly advantageous when working in remote locations or during adverse conditions. The air purge function also assists in quick starts by removing air from the fuel system and carburetor.

The 327P5X model takes it a step further with its telescopic pole, which can be extended for reaching higher branches without the need for ladders. This feature adds versatility and accessibility to challenging trimming tasks, making it a favorite among tree care specialists and landscapers alike.

Additionally, both the 327P4 and 327P5X series are equipped with a high-quality cutting system that ensures clean and efficient cuts. They come with a durable, sharp chain that minimizes wear and maintains cutting performance over time. The quick-release mechanism allows for easy maintenance and chain adjustments, ensuring the saw remains in optimal condition.

In summary, the Husqvarna 327P4 and 327P5X series are exceptional pole saws that blend power, efficiency, and user-friendly design. With technologies like the X-Torq engine, Smart Start, and a telescopic pole option, these models cater to the needs of professionals seeking reliable and effective tools for tree care and landscaping projects. Whether for routine maintenance or challenging trimming tasks, these pole saws are built to perform reliably, providing users with the confidence to tackle any job.
Top Page Image Contents