Targus ACP50 specifications Troubleshooting, Device Not Working, Verifying Devices are Installed

Targus Universal Notebook Docking Station with Video

Troubleshooting

Device Not Working

•Make sure that the device is fully inserted into the correct port on the docking station.

•Plug the device into a different port on the docking station. If it still doesn’t work, test the device by connecting it directly to your computer.

•Verify that you ran the Setup or Install program for the device.

•Make sure that the device appears in Device Manager. For more information refer to “Verifying Devices are Installed” on page 16.

•Disconnect all devices from the docking station and reconnect them, one at a time. Check that each device works before plugging in the next one.

•Each USB port is equipped with over-current protection. Should a USB device draw more current than the USB port can supply, the port will shut down. To re-enable the port, unplug the device and go to Device Manager or to the message in the system tray and choose the Reset option. You can then plug the device back into the USB port. If a shut down reoccurs, check the power requirements of the device.

Verifying Devices are Installed

You can view the devices installed on the docking station from the Device Manager window in System Properties.

15