Targus Universal Notebook Docking Station with Video
station to your computer and Windows
WARNING: YOU MUST INSTALL THE DOCKING STATION SOFTWARE BEFORE CONNECTING IT TO YOUR COMPUTER. OTHERWISE, THE DOCKING STATION WILL NOT WORK PROPERLY.
Installing the Docking Station Driver
Installing the docking station driver enables your operating system to recognize the docking station and its ports once it’s connected.
1Turn on your computer.
2Insert the driver software CD into your computer’s CD- ROM drive.
If setup does not begin automatically, click Start, Run, and enter D:\Setup.exe (where D: is the path of your CD- ROM drive) and then click OK.
3Follow any
4Click Finish and restart your computer when prompted.
Connecting the Docking Station to Your Computer
After installing the docking station software, you are ready to connect the docking station to your computer. To do this:
1Connect the supplied AC power adapter to the AC power jack on the docking station.
6