Targus ACP50 specifications Connecting and Configuring a Serial Modem, Connecting a PDA

Targus Universal Notebook Docking Station with Video

Connecting and Configuring a Serial Modem

To connect a serial modem:

1Attach the cable connector to the serial port on the docking station.

2Install the modem software driver according to the instructions that come with the device.

3When prompted to select the port, choose the Serial USB (COMx), where x is the COM port number assigned by your operating system.

Connecting a PDA

1Attach the cable connector to the serial port on the docking station.

2Verify that the COM port setting, in either your HotSync® or ActiveSync® software, matches the setting on the docking station.

To verify the COM port setting on the docking station, refer to “Verifying Devices are Installed” on page 16.

To verify the COM port setting on your PDA, refer to the documentation that came with it.

Connecting to a Local Area Network

To connect an ethernet cable with RJ-45 connect, attach the cable connector to the ethernet/network port on the docking station. Additional procedures to connect to an actual network depend on the type of network you are using. Contact your network administrator for detailed instructions.

9