Breville JE95 Care and cleaning continued, Trouble shooting guide, That’s the idea, Easy solution

Care and cleaning continued

Trouble shooting guide

•Discolouration of the plastic may occur with strongly coloured fruit and vegetables. To help prevent this, wash parts immediately after use.

•If discolouration does occur, the plastic parts can be soaked in 10% lemon juice and water or they can be cleaned with a non abrasive cleaner.

To minimize washing up place a freezer bag (or plastic grocery bag) into the pulp container to collect the pulp. When juicing is completed simply place the bag containing the pulp into a bin. (Refer page 19 for ideas on using the pulp).

That’s the idea™

Breville 5 year motor guarantee

The Breville Juice Fountain is constructed with a heavy duty 850 watt motor. So heavy duty in fact that we have given the motor a 5-year guarantee against faulty materials or manufacture. This warranty is an extension of the 12-month replacement guarantee and covers the motor only. The warranty does not cover damage caused by accident, misuse, or being used in a manner not stated in the instruction book.

The 5-year Guarantee is additional to the conditions and warranties mandatory implied by the laws and regulations of the individual States and Territories of Australia and the Trade Practices act, 1974.

Important

Breville agree to replace the Juice Fountain in the event of the motor being faulty or developing a defect or fault, within the next 4-years after the 12-month replacement guarantee. As the motor needs to be inspected by qualified technicians do not return the Juice Fountain to the retailer, take them to your nearest Breville Service Centre (Service Centres are listed on the back of the Guarantee Card). The Breville Service Centre will verify the date of the manufacture and check your receipt to validate your claim.

12 Month replacement guarantee

The Breville Juice Fountain is totally covered for the first 12-months against faulty material or manufacture by the Breville 12-month Replacement Guarantee. (See Guarantee Card enclosed)

Possible problem	Easy solution
Machine will not work	The safety locking arm may not be correctly engaged in
when switched ‘ON’	the vertical operating position with the locking arm located
	into the two grooves on either side of the juicer cover
	(see picture on page 9 step 4).
Motor appears to stall	Wet pulp can build up under the cover if the juicing action
when juicing	is too vigorous. Try slower juicing action by pushing the
	food pusher down more slowly (refer page 9 step 4).
	Clean the filter bowl surround, the stainless steel filter and
	the juicer cover.
Excess pulp building	Stop the juicing process. Remove the juicer cover, scrape off
up in the micro mesh	pulp. Re-assemble and begin juicing again. Try alternating
filter basket	(soft and hard) vegetable and fruit varieties.
Pulp too wet and	Try a slower juicing action. Remove stainless steel reduced
reduced extracted juice	mesh filter basket and thoroughly clean mesh walls with a
	fine brush. Rinse the filter basket under hot water. If the fine mesh
	holes are blocked, soak the basket in a solution of hot water with
	10% lemon juice to unblock the holes or wash in the dishwasher.
	This will remove excess fibre build up (from fruit or vegetables)
	which could be inhibiting the juice flow.
Juice leaks between	Try a slower juicing action by pushing the food pusher down
the rim of the Juicer	more slowly (refer page 12 step 4).
and cover the filter
Bowl surround	Try a slower juicing action by pushing the food
juice sprays out	pusher down more slowly (refer page 12 step 4).
from spout

16 17