Operating your Breville Juice Fountain continued
Disassembling your Breville Juice Fountain
Step 4
With the motor running, place food into the feed chute. Using the food pusher, gently guide food down the feed chute. To extract the maximum amount of juice, always push the food pusher down slowly.
4
To minimize washing up place a plastic freezer bag into the pulp container to collect the pulp.
That’s the idea™
Step 5
Juice will flow into the juice jug and the separated pulp will accumulate in the pulp container.
The pulp container can be emptied during juicing by turning the Juice Fountain ’Off‘ and then carefully removing the pulp container. (Replace empty pulp container before continuing to juice).
Step 1
Turn Juice Fountain Professional ’Off‘ at the power outlet and unplug.
Step 2
Remove the pulp container by holding the handle and pivoting the bottom of the pulp container away from the juicer.
2
Step 3
Place both hands on either side of the locking arm and pull back and lift over the grooves on either side of the juicer cover.
Step 4
Move the locking arm down.
4
Step 5
Lift the juicer cover off the Juicer.
5
Do not allow the pulp container to overfill as this may prevent correct operation or damage the unit.
Note
NEVER USE FINGERS TO PUSH FOOD DOWN THE FEED CHUTE OR TO CLEAR THE FEED CHUTE. ALWAYS USE THE FOOD PUSHER PROVIDED.
3
12 | 13 |
