Assembling your Breville Juice Fountain
Step 1
Place filter bowl surround on top of the motor base.
1
Step 3
Place the juicer cover over the filter bowl surround, positioning the feed chute over the stainless steel filter basket and lower into position.
3
Step 4
Raise the safety locking arm up and locate into the two grooves on either side of the juice cover. The safety locking arm should now be in a vertical position and locked into place on top of the juicer cover.
4A
Step 5
Slide the food pusher down the feed chute by aligning the groove in the food pusher with the small protrusion on the inside of the top of the feed tube.
5A
FOOD PUSHER
GROVE
SMALL
PROTRUSION
INSIDE FEED TUBE
Step 2
Align the arrows on the filter basket with the arrows on the motor drive coupling and push down until it clicks into place. Ensure the stainless steel filter basket is fitted securely inside the filter bowl surround and onto the motor base.
2
4B
Continue to slide the food pusher down the feed chute.
5B
8 | 9 |
