Husqvarna 327P5X-series, 327P4 Checking wear on cutting equipment Chain, Chain drive sprocket

Page 14

GENERAL SAFETY PRECAUTIONS

What to do if lubrication does not work:

•Check that the oil channel in the bar is not obstructed. Clean if necessary.

•Check that the oil channel in the gear housing is clean. Clean if necessary.

•Check that the bar tip sprocket turns freely. If the chain lubrication system is still not working after carrying out the above checks you should contact your service workshop.

Checking wear on cutting equipment

Chain

Check the chain daily for:

•Visible cracks in rivets and links.

•Whether the chain is stiff.

•Whether rivets and links are badly worn.

We recommend you compare the existing chain with a new chain to decide how badly the existing chain is worn.

When the length of the cutting teeth has worn down to only 4 mm the chain must be replaced.

Chain drive sprocket

Regularly check the degree of wear on the drive sprocket. Replace if wear is excessive.

Bar

Check regularly:

•Whether there are burrs on the edges of the bar. Remove these with a file if necessary.

•Whether the groove in the bar has become badly worn. Replace the bar if necessary.

•Whether the tip of the bar is uneven or badly worn. If a hollow forms on the underside of the bar tip this is due to running with a slack chain.

•To prolong the life of the bar you should turn it over daily.

 

!

WARNING! A faulty cutting attachment

 

may increase the risk of accidents.

 

 

 

 

 

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 327P4 327P5X-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutMuffler Stop switchVibration damping system Only use cutting equipment recommended by us Quick release Balance Flex harnessCutting equipment Chain Sharpening your chain and adjusting raker clearanceSpecification of bar and saw chain General Safety Precautions Tensioning the chain Filling with chain oil Adjusting chain lubricationLubricating cutting equipment Checking chain lubricationChain drive sprocket Checking wear on cutting equipment ChainWhat to do if lubrication does not work May increase the risk of accidentsFitting the cutting head AssemblyAdjusting the harness Fitting the bar and chainAssembling and dismantling the two-piece shaft AssemblyFilling with oil Fitting the impact guardAssembly of the saw attachment Fuel Fuel safetyFuel Handling Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping Working Techniques Safety instructions regarding the surroundingsSafety instructions while working General working instructionsSafety instructions after completing work Basic working techniquesWithout having the cutting attachment in full view Maintenance CarburettorLow speed jet L Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HSpark plug MufflerCooling system Is damaged it should be replacedAir filter Cleaning the air filterTwo-piece shaft Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataBar and chain combinations Approved accessories Art No Use withEC-declaration of conformity Applies to Europe only Page Page Page Page 1150991-26

327P5X-series, 327P4 specifications

The Husqvarna 327P4 and 327P5X series are advanced professional pole saws designed for efficiency and ease of use in demanding applications. With their innovative features and robust construction, these models stand out in the market, catering to a wide range of tree care and landscaping needs.

One of the defining characteristics of the Husqvarna 327P4 and 327P5X series is their powerful engines. Equipped with a high-performance X-Torq engine, these pole saws deliver increased power output while significantly reducing fuel consumption and emissions. This technology not only enhances performance but also aligns with environmental standards, making these tools a sustainable choice for professionals in the field.

The ergonomic design of the pole saws ensures that users can operate them comfortably during extended periods. The lightweight construction, combined with an optimal weight balance, minimizes user fatigue. Additionally, the adjustable harness offers greater control, allowing operators to manage the saw with precision and ease, even at greater heights.

Both models feature Husqvarna's unique Smart Start system, which allows for hassle-free starting with minimal effort. This is particularly advantageous when working in remote locations or during adverse conditions. The air purge function also assists in quick starts by removing air from the fuel system and carburetor.

The 327P5X model takes it a step further with its telescopic pole, which can be extended for reaching higher branches without the need for ladders. This feature adds versatility and accessibility to challenging trimming tasks, making it a favorite among tree care specialists and landscapers alike.

Additionally, both the 327P4 and 327P5X series are equipped with a high-quality cutting system that ensures clean and efficient cuts. They come with a durable, sharp chain that minimizes wear and maintains cutting performance over time. The quick-release mechanism allows for easy maintenance and chain adjustments, ensuring the saw remains in optimal condition.

In summary, the Husqvarna 327P4 and 327P5X series are exceptional pole saws that blend power, efficiency, and user-friendly design. With technologies like the X-Torq engine, Smart Start, and a telescopic pole option, these models cater to the needs of professionals seeking reliable and effective tools for tree care and landscaping projects. Whether for routine maintenance or challenging trimming tasks, these pole saws are built to perform reliably, providing users with the confidence to tackle any job.
Top Page Image Contents