Husqvarna 327P5X-series, 327P4 manual Specification of bar and saw chain, Chain

Page 10

GENERAL SAFETY PRECAUTIONS

Specification of bar and saw chain

When the cutting attachment supplied with your machine has to be replaced, because it is worn out or damaged, you must only fit the types of bar and saw chain recommended by us.

Bar

•Length (inches/cm)

•Number of teeth on bar tip sprocket (T). Small number = small tip radius = low risk of kickback.

•Chain pitch (inches). The spacing between the drive links of the chain must match the spacing of the teeth on the bar tip sprocket and drive sprocket.

•Number of drive links. The number of drive links is determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

•Bar groove width (inches/mm). The groove in the bar must match the width of the chain drive links.

•Lubrication hole and hole for the chain tensioner.

Chain

•Saw chain pitch (inches). (The distance between three drive links, divided by two.)

•Drive link width (mm/inches)

•Number of drive links.

Sharpening your chain and adjusting raker clearance

 

!

WARNING! The risk of kickback is

 

increased with a badly sharpened chain!

 

 

 

 

 

General information on sharpening cutting teeth

• Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the cuttings will be very small. If the chain is very blunt it will not produce any cuttings at all. Wood powder would be the only result.

• A sharp chain eats its way through the wood and produces long, thick cuttings.

• The cutting part of the chain is called the cutting link and this consists of a cutting tooth (A) and the raker lip

(B). The cutting depth is determined by the difference in height between the two.

A B

•When you sharpen a cutting tooth there are five important factors to remember.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 327P4 327P5X-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchMuffler Cutting equipment Quick release Balance Flex harnessOnly use cutting equipment recommended by us Specification of bar and saw chain Sharpening your chain and adjusting raker clearanceChain General Safety Precautions Tensioning the chain Filling with chain oil Adjusting chain lubricationLubricating cutting equipment Checking chain lubricationChain drive sprocket Checking wear on cutting equipment ChainWhat to do if lubrication does not work May increase the risk of accidentsFitting the cutting head AssemblyAdjusting the harness Fitting the bar and chainAssembling and dismantling the two-piece shaft AssemblyFilling with oil Fitting the impact guardAssembly of the saw attachment Fuel Handling Fuel safetyFuel Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping Working Techniques Safety instructions regarding the surroundingsSafety instructions while working General working instructionsSafety instructions after completing work Basic working techniquesWithout having the cutting attachment in full view Maintenance CarburettorLow speed jet L Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HSpark plug MufflerCooling system Is damaged it should be replacedAir filter Cleaning the air filterTwo-piece shaft Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe only Approved accessories Art No Use withBar and chain combinations Page Page Page Page 1150991-26

327P5X-series, 327P4 specifications

The Husqvarna 327P4 and 327P5X series are advanced professional pole saws designed for efficiency and ease of use in demanding applications. With their innovative features and robust construction, these models stand out in the market, catering to a wide range of tree care and landscaping needs.

One of the defining characteristics of the Husqvarna 327P4 and 327P5X series is their powerful engines. Equipped with a high-performance X-Torq engine, these pole saws deliver increased power output while significantly reducing fuel consumption and emissions. This technology not only enhances performance but also aligns with environmental standards, making these tools a sustainable choice for professionals in the field.

The ergonomic design of the pole saws ensures that users can operate them comfortably during extended periods. The lightweight construction, combined with an optimal weight balance, minimizes user fatigue. Additionally, the adjustable harness offers greater control, allowing operators to manage the saw with precision and ease, even at greater heights.

Both models feature Husqvarna's unique Smart Start system, which allows for hassle-free starting with minimal effort. This is particularly advantageous when working in remote locations or during adverse conditions. The air purge function also assists in quick starts by removing air from the fuel system and carburetor.

The 327P5X model takes it a step further with its telescopic pole, which can be extended for reaching higher branches without the need for ladders. This feature adds versatility and accessibility to challenging trimming tasks, making it a favorite among tree care specialists and landscapers alike.

Additionally, both the 327P4 and 327P5X series are equipped with a high-quality cutting system that ensures clean and efficient cuts. They come with a durable, sharp chain that minimizes wear and maintains cutting performance over time. The quick-release mechanism allows for easy maintenance and chain adjustments, ensuring the saw remains in optimal condition.

In summary, the Husqvarna 327P4 and 327P5X series are exceptional pole saws that blend power, efficiency, and user-friendly design. With technologies like the X-Torq engine, Smart Start, and a telescopic pole option, these models cater to the needs of professionals seeking reliable and effective tools for tree care and landscaping projects. Whether for routine maintenance or challenging trimming tasks, these pole saws are built to perform reliably, providing users with the confidence to tackle any job.
Top Page Image Contents