Husqvarna 345, 346XP, 353, 345e manual Sharpening cutting teeth, Adjustment of depth gauge setting

Page 12

GENERAL SAFETY PRECAUTIONS

When you sharpen a cutting tooth there are four important factors to remember.

1 Filing angle

2Cutting angle

3File position

4Round file diameter

It is very difficult to sharpen a chain correctly without the right equipment. We recommend that you use our file gauge. This will help you obtain the maximum kickback reduction and cutting performance from your chain.

See instructions under the heading Technical data for information about sharpening your chain.

WARNING! Departure from the sharpening

!instructions considerably increases the risk of kickback.

Sharpening cutting teeth

To sharpen cutting teeth you will need a round file and a file gauge. See instructions under the heading Technical data for information on the size of file and gauge that are recommended for the chain fitted to your chain saw.

•Check that the chain is correctly tensioned. A slack chain will move sideways, making it more difficult to sharpen correctly.

•Always file cutting teeth from the inside face. Reduce the pressure on the return stroke. File all the teeth on one side first, then turn the chain saw and file the teeth on the other side.

•File all the teeth to the same length. When the length of the cutting teeth is reduced to 0.16 inch (4 mm) the chain is worn out and should be replaced.

General advice on adjusting depth gauge setting

•When you sharpen the cutting tooth (A) the depth gauge setting (C) will decrease. To maintain optimal cutting performance the depth gauge (B) has to be filed down to achieve the recommended depth gauge setting. See instructions under the heading Technical data to find the correct depth gauge setting for your particular chain.

WARNING! The risk of kickback is increased

!if the depth gauge setting is too large!

Adjustment of depth gauge setting

•The cutting teeth should be newly sharpened before adjusting the depth gauge setting. We recommend that you adjust the depth gauge setting every third time you sharpen the cutting teeth. NOTE! This recommendation assumes that the length of the cutting teeth is not reduced excessively.

•You will need a flat file and a depth gauge tool. We recommend that you use our depth gauge tool to acheive the correct depth gauge setting and bevel for the depth gauge.

•Place the depth gauge tool over the chain. Detailed information regarding the use of the depth gauge tool, will be found on the package for the depth gauge tool. Use the flat file to file off the tip of the depth gauge that protrudes through the depth gauge tool. The depth gauge setting is correct when you no longer feel resistance as you draw the file along the depth gauge tool.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents TrioBrake KEY to Symbols Symbols on the machineSymbols in the operator’s manual You will find the following labels on your chain sawContents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Throttle lockout Chain catcherRight hand guard Vibration damping systemStop switch Cutting equipmentMuffler General rulesSharpening your chain and adjusting depth gauge setting Cutting equipment designed to reduce kickbackGeneral advice on adjusting depth gauge setting Adjustment of depth gauge settingIf the depth gauge setting is too large Sharpening cutting teethTensioning the chain Lubricating cutting equipmentChain oil Filling with chain oilChain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Bar Assembly Fitting the bar and chainFuel Handling FuelFuel safety FuelingTransport and storage Long-term storageStarting and Stopping Starting and stoppingCold engine Warm engineStopping Basic safety rules Working TechniquesBefore use General working instructionsGeneral rules Basic cutting technique GeneralTerms LimbingTree felling technique CuttingSafe distance Log is supported at one end. There is a high risk that itFelling direction Clearing the trunk and preparing your retreatFelling Directional cutsFelling cut How to avoid kickback What is kickback?Freeing a tree that has fallen badly Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral Correctly adjusted carburetor Checking brake band wearChecking the front hand guard Checking the inertia brake releaseChecking the brake trigger Muffler StarterChanging a broken or worn starter cord 345eReplacement of broken recoil and drive disc springs Air filterTensioning the recoil spring Fitting the starterAdjustment of the oil pump When making adjustmentsSpark plug Lubricating the bar tip sprocketAir Injection centrifugal cleaning Cooling systemHeated handles Electrical carburetor heatingTemperature 0C 32F or colder Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations Saw chain filing and file gauges058/1,5 mm 050/1,3 mmFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsAmerican Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautions´z+RA¶5¨ Page 1150330-95 ´z+RA¶5¨ ´z+RA¶5¨

345e, 345, 346XP, 353 specifications

Husqvarna is renowned for crafting high-performance chainsaws, and the models 345e, 345, 346XP, and 353 are prime examples of their engineering excellence. Each of these chainsaws is designed to cater to the needs of both professionals and enthusiasts, boasting impressive features and advanced technology.

The Husqvarna 345e is a powerful yet lightweight chainsaw. It is equipped with a 50.2cc engine, delivering an impressive output of 3.0 horsepower. Its X-Torq technology reduces fuel consumption and emissions, making it an environmentally friendly option. Additionally, the chainsaw features an ergonomic design, ensuring comfort during prolonged use. The LowVib technology minimizes vibrations, reducing operator fatigue.

Next in line, the Husqvarna 345 is similar in many respects to the 345e but focuses on providing a robust and reliable performance. It also features a 50.2cc engine and utilizes X-Torq technology for optimal fuel efficiency and low emissions. One of the standout features of the 345 is its tool-less chain tensioning system, allowing for easy adjustments without the need for additional tools. This is particularly advantageous for users who require quick adjustments in the field.

The Husqvarna 346XP is a favorite among professionals, designed for heavy-duty tasks. Its X-Torq engine delivers exceptional power, while its lightweight construction enhances maneuverability. The 346XP features Air Injection technology, which reduces the amount of dust and debris that enters the air filter, prolonging the life of the chainsaw. Additionally, the chainsaw’s adjustable oil pump ensures that the chain receives the right amount of lubrication, optimizing performance and longevity.

The Husqvarna 353 is built for versatility and performance. With a 50cc engine, it provides ample power for a wide range of cutting tasks. Its innovative features include a robust crankshaft designed for higher revolutions, enhancing overall performance. The 353 also incorporates the innovative Smart Start technology, making it easier to start the engine with minimal effort. Its ergonomic design ensures comfortable operation, reducing fatigue during extended use.

In summary, the Husqvarna 345e, 345, 346XP, and 353 chainsaws are distinguished by their advanced technologies and user-friendly features. Whether for professional use or as a reliable tool for everyday tasks, these models exemplify Husqvarna’s commitment to quality, efficiency, and performance.
Top Page Image Contents