Husqvarna 45 manual Basic cutting technique, General, Terms, Cutting

Page 20

SAFETY INSTRUCTIONS

2 Basic cutting technique

General

•Always use full throttle when cutting!

•Reduce the speed to idle after every cut (running the engine for too long at full throttle without any load can lead to serious engine damage).

•Cutting from above = Cutting on the pull stroke.

•Cutting from below = Cutting on the push stroke.

See the section on ”How to avoid kickback” to find out why cutting on the push stroke increases the risk of kickback.

Terms:

Cutting

=

General term for cutting through wood.

Limbing

=

Cutting limbs off a felled tree.

Splitting

=

When the object you are cutting breaks off

 

 

before the cut is complete.

There are five important factors you should consider before making a cut:

1 Make sure the bar will not jam in the cut.

2 Make sure the log will not split.

3 Make sure the chain will not strike the ground or any other object during or after cutting.

4Is there a risk of kick- back?

5Do the conditions and surrounding terrain affect your safety when working?

Two factors decide whether the chain will jam or the log will split. The first is how the log is supported and the second is whether it is in tension.

In most cases you can avoid these problems by cutting in two stages; from the top and from the bottom of the log. You need to support the log so that it will not trap the chain or split during cutting.

!If the chain jams in the cut:

STOP THE ENGINE! Don’t try to pull the saw free. If you do you may damage the chain when the saw suddenly breaks free. Use a lever to open up the cut and free the bar.

The following instructions describe how to handle most types of situation that you will be faced with when using a chain saw.

Cutting

1 The log is lying on the ground. There is little risk of the chain jamming or the log splitting. However there is a risk that the chain will touch the ground when you finish the cut.

Cut all the way through the log from above. Try not to touch the ground as you finish the cut. Maintain full throttle but be prepared in case the chain snatches.

A If it is possible to turn the log you should stop cutting about 2/3 of the way through.

BTurn the log and finish the cut from the

opposite side.

20 – English

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 45/49 101 90KEY to Symbols SymbolsContents Personal Protective Equipment Safety InstructionsChain SAW Safety Equipment Chain brake and front hand guard Right hand guard Throttle lockChain catcher Muffler Stop switchVibration damping system Checking brake band wear Checking the front hand guardChecking the automatic brake Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesCutting equipment designed to minimise kickback BarSaw chain Some terms that describe the bar and chainSharpening cutting teeth Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Tensioning the chain General advice on setting raker clearanceSetting the raker clearance Filling with chain oil Lubricating cutting equipmentChain oil Checking chain lubrication Lubricating the clutch drum bearingChecking wear on cutting equipment Lubricating the bar tip sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handles10 ft General Safety PrecautionsMin m Basic safety rules General Working InstructionsBasic cutting technique GeneralTerms CuttingTree felling technique Safe distanceLimbing Felling directionClearing the trunk and preparing your retreat FellingFreeing a tree that has fallen badly = high accident risk Cutting the trunk into logsFreeing a Trapped tree Cutting trees and branches that are in tension PreparationsWhat is WHAT? Assembly Mounting guide bar and chainFuel Handling Fuelmix10ft FuellingMin 3 m Start and Stop Cold engineWarm engine StartMaintenance CarburetorStarter device assembly Starter deviceChanging a broken or worn starter cord Tensioning the recoil springNeedle bearing maintenance Air filterMuffler Spark plugCooling system Daily maintenanceCentrifugal cleaning Air Injection Weekly maintenance Monthly maintenance Technical Data Federal Emission Control Warranty Statement Your Warranty Rights Obligations1998W48

45 specifications

The Husqvarna 45 is a powerful and reliable chainsaw designed for both novice and experienced users looking for a versatile tool for various cutting tasks. Known for its durability and performance, this chainsaw is suitable for everything from felling trees to cutting firewood, making it a favorite among homeowners, gardeners, and landowners.

One of the main features of the Husqvarna 45 is its lightweight design, weighing in at around 11 lbs. This makes it easy to handle and maneuver, allowing users to work for extended periods without experiencing undue fatigue. Its ergonomic design includes a comfortable handle that provides a secure grip and helps maintain control during operation.

The chainsaw is powered by a robust 45cc X-Torq engine, which delivers a strong performance while minimizing fuel consumption and exhaust emissions. This innovative engine technology not only enhances power output but also decreases the environmental impact, aligning with today’s demand for eco-friendly tools. With a power output of 2.4 kW, the Husqvarna 45 can handle tough cutting tasks with ease.

To ensure optimal cutting efficiency, the Husqvarna 45 features an automatic oil pump that adjusts oil flow based on chain speed and temperature, providing the right amount of lubrication for enhanced performance and durability. Additionally, the chain tensioning system allows for quick and easy adjustments without the need for additional tools, ensuring that users can maintain the chainsaw with minimal effort.

Safety is another critical aspect of the Husqvarna 45. It incorporates several safety features, including a chain brake that engages automatically when the front handle is activated. This prevents kickback and improves user safety, making it suitable for operators of varying skill levels. The chainsaw also includes a hand guard to further protect users from potential accidents.

In summary, the Husqvarna 45 is a well-rounded chainsaw featuring a lightweight, ergonomic design, a powerful X-Torq engine, and automatic oiling for optimal performance. With its focus on safety and user-friendliness, this chainsaw is an excellent choice for anyone looking to tackle various cutting tasks around the home or property. Whether you are clearing brush, cutting firewood, or performing tree maintenance, the Husqvarna 45 is equipped to deliver reliable results with every use.
Top Page Image Contents