Husqvarna 45 manual Assembly, Mounting guide bar and chain

Page 25

ASSEMBLY

Mounting guide bar and chain

!Always wear gloves, when working with the chain, in order to protect your hands from injury.

Hold up the tip of the bar and tighten the chain. The chain is correctly tensioned when there is no slack on the

Check that the chain brake is in disengaged position by moving the front hand guard towards the front handle.

Take off the bar nuts and remove the clutch cover. Take off the transportation ring (A).

A

underside of the bar, but it can still be turned easily by hand. Hold up the bar tip and tighten the bar nuts with the combination wrench.

When fitting a new chain, the chain tension has to be checked frequently until the chain is run-in. Check the chain tension regularly. A correctly tensioned chain gives good cutting performance and long lifetime.

Fit the bar over the bar bolts. Place the bar in its rearmost position. Place the chain over the drive sprocket and in the groove on the bar. Begin on the top side of the bar. Make sure that the edges on the cutting links are facing forward on the top side of the bar.

Fit the clutch cover and locate the chain adjuster pin in the hole on the bar. Check that the drive links of the chain fit correctly on the drive sprocket and that the chain is in the groove on the bar. Tighten the bar nuts finger tight.

Tension the chain by using the combination wrench. Turn the chain adjuster screw clockwise. The chain should be tensioned until it fits snugly on the underside of the bar.

English – 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 101 90 45/49Symbols KEY to SymbolsContents Chain SAW Safety Equipment Safety InstructionsPersonal Protective Equipment Chain brake and front hand guard Chain catcher Throttle lockRight hand guard Vibration damping system Stop switchMuffler Checking the front hand guard Checking brake band wearChecking the automatic brake Checking the brake triggerThrottle lock 5 basic rules Cutting EquipmentBar Cutting equipment designed to minimise kickbackSaw chain Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting raker clearanceSharpening cutting teeth Setting the raker clearance General advice on setting raker clearanceTensioning the chain Chain oil Lubricating cutting equipmentFilling with chain oil Lubricating the clutch drum bearing Checking chain lubricationChecking wear on cutting equipment Lubricating the bar tip sprocketWhat is kickback? HOW to Avoid KickbackDo not let go of the handles General rulesMin m General Safety Precautions10 ft General Working Instructions Basic safety rulesGeneral Basic cutting techniqueTerms CuttingSafe distance Tree felling techniqueLimbing Felling directionFelling Clearing the trunk and preparing your retreatCutting the trunk into logs Freeing a tree that has fallen badly = high accident riskFreeing a Trapped tree Cutting trees and branches that are in tension PreparationsWhat is WHAT? Mounting guide bar and chain AssemblyFuelmix Fuel HandlingMin 3 m Fuelling10ft Cold engine Start and StopWarm engine StartCarburetor MaintenanceStarter device Starter device assemblyChanging a broken or worn starter cord Tensioning the recoil springAir filter Needle bearing maintenanceMuffler Spark plugCentrifugal cleaning Air Injection Daily maintenanceCooling system Weekly maintenance Monthly maintenance Technical Data Your Warranty Rights Obligations Federal Emission Control Warranty Statement1998W48

45 specifications

The Husqvarna 45 is a powerful and reliable chainsaw designed for both novice and experienced users looking for a versatile tool for various cutting tasks. Known for its durability and performance, this chainsaw is suitable for everything from felling trees to cutting firewood, making it a favorite among homeowners, gardeners, and landowners.

One of the main features of the Husqvarna 45 is its lightweight design, weighing in at around 11 lbs. This makes it easy to handle and maneuver, allowing users to work for extended periods without experiencing undue fatigue. Its ergonomic design includes a comfortable handle that provides a secure grip and helps maintain control during operation.

The chainsaw is powered by a robust 45cc X-Torq engine, which delivers a strong performance while minimizing fuel consumption and exhaust emissions. This innovative engine technology not only enhances power output but also decreases the environmental impact, aligning with today’s demand for eco-friendly tools. With a power output of 2.4 kW, the Husqvarna 45 can handle tough cutting tasks with ease.

To ensure optimal cutting efficiency, the Husqvarna 45 features an automatic oil pump that adjusts oil flow based on chain speed and temperature, providing the right amount of lubrication for enhanced performance and durability. Additionally, the chain tensioning system allows for quick and easy adjustments without the need for additional tools, ensuring that users can maintain the chainsaw with minimal effort.

Safety is another critical aspect of the Husqvarna 45. It incorporates several safety features, including a chain brake that engages automatically when the front handle is activated. This prevents kickback and improves user safety, making it suitable for operators of varying skill levels. The chainsaw also includes a hand guard to further protect users from potential accidents.

In summary, the Husqvarna 45 is a well-rounded chainsaw featuring a lightweight, ergonomic design, a powerful X-Torq engine, and automatic oiling for optimal performance. With its focus on safety and user-friendliness, this chainsaw is an excellent choice for anyone looking to tackle various cutting tasks around the home or property. Whether you are clearing brush, cutting firewood, or performing tree maintenance, the Husqvarna 45 is equipped to deliver reliable results with every use.
Top Page Image Contents