Husqvarna 45 manual Start and Stop, Cold engine, Warm engine

Page 28

START AND STOP

Start and stop

!WARNING!

•Never start the saw engine without the bar, chain and clutch cover (chain brake) assembled - or else the clutch can come loose and cause personal injuries.

•Always move the saw away from the fueling area before starting.

•Place the saw on clear ground and make sure that the chain is not contacting anything. Also, make sure that you have a secure footing.

•Keep people and animals well away from the working area.

Cold engine

CHAIN BRAKE:

Disengage the chain brake by pulling the hand guard towards the front handle.

IGNITION:

Move the ignition switch to startposition.

CHOKE:

Set the choke control in choke position.

FAST IDLE:

Combined choke/fast idle is received when the choke is moved to choke position.

Warm engine

Use the same procedure as for starting cold engine but without choke. Fast idle is recived by first set the choke control in choke position, and then back again.

Start

Grip the front handle with your left hand and hold the saw down by putting your right foot in the rear handle. Pull the starter handle with your right hand and pull out the starter cord slowly until the starter pawls engage. Then pull sharply.

Push in the choke control immediately when the engine ignites and make repeated starting attemps. When the engine starts, rapidly give full throttle. Then the throttle latch will disengage.

CAUTION! Do not release the starter handle from fully pulled out position as this can cause damage on the saw.

Stop

The engine is stopped by switching off the ignition. (Move the ignition switch to stop position.)

28 – English

Page 27 Page 29
Image 28
Page 27 Page 29
Contents 45/49 101 90KEY to Symbols SymbolsContents Chain SAW Safety Equipment Safety InstructionsPersonal Protective Equipment Chain brake and front hand guard Chain catcher Throttle lockRight hand guard Vibration damping system Stop switchMuffler Checking brake band wear Checking the front hand guardChecking the automatic brake Checking the brake triggerThrottle lock Cutting Equipment 5 basic rulesCutting equipment designed to minimise kickback BarSaw chain Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting raker clearanceSharpening cutting teeth Setting the raker clearance General advice on setting raker clearanceTensioning the chain Chain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubrication Lubricating the clutch drum bearingChecking wear on cutting equipment Lubricating the bar tip sprocketHOW to Avoid Kickback What is kickback?General rules Do not let go of the handlesMin m General Safety Precautions10 ft Basic safety rules General Working InstructionsBasic cutting technique GeneralTerms CuttingTree felling technique Safe distanceLimbing Felling directionClearing the trunk and preparing your retreat FellingFreeing a tree that has fallen badly = high accident risk Cutting the trunk into logsFreeing a Trapped tree Cutting trees and branches that are in tension PreparationsWhat is WHAT? Assembly Mounting guide bar and chainFuel Handling FuelmixMin 3 m Fuelling10ft Start and Stop Cold engineWarm engine StartMaintenance CarburetorStarter device assembly Starter deviceChanging a broken or worn starter cord Tensioning the recoil springNeedle bearing maintenance Air filterMuffler Spark plugCentrifugal cleaning Air Injection Daily maintenanceCooling system Weekly maintenance Monthly maintenance Technical Data Federal Emission Control Warranty Statement Your Warranty Rights Obligations1998W48

45 specifications

The Husqvarna 45 is a powerful and reliable chainsaw designed for both novice and experienced users looking for a versatile tool for various cutting tasks. Known for its durability and performance, this chainsaw is suitable for everything from felling trees to cutting firewood, making it a favorite among homeowners, gardeners, and landowners.

One of the main features of the Husqvarna 45 is its lightweight design, weighing in at around 11 lbs. This makes it easy to handle and maneuver, allowing users to work for extended periods without experiencing undue fatigue. Its ergonomic design includes a comfortable handle that provides a secure grip and helps maintain control during operation.

The chainsaw is powered by a robust 45cc X-Torq engine, which delivers a strong performance while minimizing fuel consumption and exhaust emissions. This innovative engine technology not only enhances power output but also decreases the environmental impact, aligning with today’s demand for eco-friendly tools. With a power output of 2.4 kW, the Husqvarna 45 can handle tough cutting tasks with ease.

To ensure optimal cutting efficiency, the Husqvarna 45 features an automatic oil pump that adjusts oil flow based on chain speed and temperature, providing the right amount of lubrication for enhanced performance and durability. Additionally, the chain tensioning system allows for quick and easy adjustments without the need for additional tools, ensuring that users can maintain the chainsaw with minimal effort.

Safety is another critical aspect of the Husqvarna 45. It incorporates several safety features, including a chain brake that engages automatically when the front handle is activated. This prevents kickback and improves user safety, making it suitable for operators of varying skill levels. The chainsaw also includes a hand guard to further protect users from potential accidents.

In summary, the Husqvarna 45 is a well-rounded chainsaw featuring a lightweight, ergonomic design, a powerful X-Torq engine, and automatic oiling for optimal performance. With its focus on safety and user-friendliness, this chainsaw is an excellent choice for anyone looking to tackle various cutting tasks around the home or property. Whether you are clearing brush, cutting firewood, or performing tree maintenance, the Husqvarna 45 is equipped to deliver reliable results with every use.
Top Page Image Contents