Husqvarna 968999276 / CZ4818BIA manual Mowing Tips

Page 17

OPERATION

NOTE: Before starting, read the warm and cold starting procedures below.

Insert key into the ignition and turn the key clockwise to “START” position and release the key as soon the engine starts. Do not run the starter continuously for more than 15 seconds per minute. If the engine does not start after several attempts, push the throttle control into the choke position, wait a few minutes and try again. If the engine still does not start, move the throttle control back into the fast position and retry.

WARM WEATHER STARTING (50° F and above)

When the engine starts, slowly pull the throttle control back until the engine begins to run smoothly. If the engine starts to run roughly, press the throttle control back forward to choke the engine for a few seconds. Then continue to pull the throttle control back to the fast position.

The PTO switch and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING (50° F and below)

When the engine starts, slowly pull the throttle control back until the engine

begins to run smoothly. Continue to pull back on the throttle control in small steps allowing the engine to accept small changes in speed and load, until the throttle control is completely in the fast position. If the engine starts to run roughly, press the throttle control back forward to choke the engine for a few seconds. Then continue to pull the throttle control back slowly to the fast position. This may require an engine warm up period from several seconds to several minutes, depending on the temperature.

MOWING TIPS

The cutting deck should be properly leveled for best mowing performance. See “TO LEVEL DECK” in the Service and Adjustment section of this manual.

The left hand side of the deck should be used for trimming.

Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the mower.

This will result in more even distribution of clippings and a more uniform cut.

If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clippings. Make first cut relatively high; second to desired height.

Do not mow grass when it is wet. Wet grass will plug the deck and leave undesirable clumps. Allow grass to dry before mowing.

Always operate engine at full throttle when mowing to assure better mowing performance and proper discharge of material. Regulate ground speed by going slow enough to allow proper deck cutting performance as well as the quality of cut desired. When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

17

Image 17
Contents 968999276 / CZ4818BIA Operators Manual ModelsTechnical Assistance Contents General Operation Safety RulesII. Slope Operation Safe Operation Practices for RIDE-ON MowersSafe Operation Practices for RIDE-ON Mowers Do not III. ServiceIII. Children Safety Rules Customer Responsibilities SpecificationsTools Required For Assembly AssemblyTo Remove the Mower from Crate Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Check the Tire Pressure ChecklistIZT Integrated Zeroturn Transaxle Bypass Linkages OperationControls Engine HOW to USE Your MowerDeck Blades To Adjust the Deck Cutting Height See Fig Rollers See Figure To Adjust ANTI-SCALPTo Operate Mower To Operate on HillsTo Transport See Fig To Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Before Each USE Maintenance ScheduleGeneral Recommendations Operator Presence System Lubrication ChartBlade Care TiresTo Sharpen Blade See Fig BatteryClean AIR INTAKE/COOLING Areas Clean AIR ScreenBelts EngineAIR Filter CleaningEngine OIL Filter Spark PlugsBefore Performing ANY Service or Adjustments Service and AdjustmentMower To Level DeckTo Replace Deck Belt FRONT-TO-BACKADJUSTMENTSee FigTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Adjust Control Levers See Fig To Adjust the Seat See FigTo Start AN Engine with a Weak Battery To Remove Wheels for RepairTo Attach Jumper Cables To Adjust Park BrakeTracking Adjustment Storage BatteryFuel System Engine OILCylinders OtherProblem Cause Correction Troubleshooting PointsAttachment Poor cut uneven ProblemcausecorrectionWiring Schematic

968999276 / CZ4818BIA specifications

The Husqvarna 968999276, also known as the CZ4818BIA, is a high-performance garden tractor designed for both residential and professional landscaping tasks. Known for its robust build quality and advanced features, this versatile machine offers exceptional performance and user-friendly operation.

One of the key features of the CZ4818BIA is its powerful engine. Equipped with a reliable and efficient petrol engine, it delivers ample horsepower to tackle various mowing tasks with ease. This engine is designed to provide optimal power while ensuring fuel efficiency, making it ideal for long hours of operation without frequent refueling.

The tractor boasts a cutting width of 48 inches, enabling users to cover large areas in a minimal amount of time. Its adjustable cutting height allows for precision mowing, ensuring that users can achieve their desired lawn height for maximum aesthetic appeal. The cutting deck is constructed from durable materials, ensuring longevity and resistance to wear and tear, even when used on challenging terrains.

Another notable feature is its ease of maneuverability. The CZ4818BIA is equipped with a tight turning radius, making it easy to navigate around obstacles such as trees, flower beds, and garden furniture. This feature enhances efficiency, allowing users to mow their lawns without the need for extensive trimming afterward.

The Husqvarna 968999276 includes advanced technological components, such as the Automatic Controlled Transmission (ACT) that allows for smooth and effortless speed changes. This technology enables the operator to focus on mowing rather than constantly adjusting speeds or gears.

Comfort is also a priority in the design of this garden tractor. The seating area is ergonomically designed, featuring a comfortable seat with ample back support. The user-friendly dashboard includes intuitive controls for easy access to all functionalities, allowing for a more enjoyable mowing experience.

Additionally, the CZ4818BIA is compatible with various attachments, including baggers, mulchers, and snow plows, increasing its versatility throughout the year. This adaptability makes it not just a lawn mower but an all-season landscaping tool.

In summary, the Husqvarna 968999276 / CZ4818BIA is an outstanding garden tractor that combines power, efficiency, and user-friendly features. With its durable construction, advanced technologies, and versatility, it stands out as an excellent choice for those seeking a reliable and effective lawn care solution. Whether for residential lawns or professional landscaping, this tractor promises to deliver superior performance and satisfaction.