Husqvarna 968999276 / CZ4818BIA Tools Required For Assembly, To Remove the Mower from Crate

Page 8

ASSEMBLY

Your new mower has been assembled at the factory with the exception of those parts left un- assembled for shipping purposes. To ensure safe and proper operation of your mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED

FOR ASSEMBLY

1.9/16" wrench or 9/16" socket w/ drive ratchet

2.Tire pressure gauge

3.Nail bar or claw hammer

4.Wire snips

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated).

TO REMOVE THE MOWER FROM CRATE

UNPACK CRATE

•Using the nail bar or hammer, remove the top of the crate first. Then remove the sides of the crate and place these out of the way. Be careful of any exposed nails or staples.

•Remove the plastic bag that covers the mower.

•Using the wire snips, cut any plastic ties that are holding the mower to the crate.

•Remove the seat off of the front of the mower and place in a safe location.

BEFORE REMOVING THE

MOWER FROM THE SKID

ATTACH SEAT (See Fig. 1)

The seat position should be adjusted forward or backward so that the operator can comfortably reach the deck lift pedal and safely operate the mower. See "Service and Adjustment" Section of this manual.

•Remove protective wrap from the seat.

•Remove the three prong knobs and washers from the seat and place in the storage area in the right side console.

•Raise the seat pan up so that the bottom can be easily accessed.

•Securing one of the three prong knobs and washers, insert it thru the seat pan slot and into the corresponding threaded hole in the seat bottom.

•Repeat for the other three holes.

•Tighten the three prong knobs in the approximate position desired for the seat.

•Connect the wiring harness to the seat

switch.

Adjustments may be required to position the seat in the desired position. Refer to the "Service and Adjustment" section of this manual.

SEAT PAN

KNOBS

WIRE

HARNESS

FIGURE 1

ATTACH CONTROL LEVERS (See Fig. 2)

•Using the 9/16" wrench or socket and ratchet, remove the bottom hex bolt and spring washer from the control arm.

•Rotate the control lever up until the bolt and spring washer can be placed thru the slot in the bottom of the control lever and threaded back into the control arm.

•Center the hex bolt in the slot on the control lever. Using the wrench or ratchet, tighten both the top and bottom hex bolts.

•Repeat on opposite side of the mower.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operators Manual Models 968999276 / CZ4818BIATechnical Assistance Contents Safety Rules General OperationII. Slope Operation Safe Operation Practices for RIDE-ON MowersSafe Operation Practices for RIDE-ON Mowers Do not III. ServiceIII. Children Safety Rules Specifications Customer ResponsibilitiesAssembly Tools Required For AssemblyTo Remove the Mower from Crate Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureIZT Integrated Zeroturn Transaxle Bypass Linkages OperationControls Engine HOW to USE Your MowerDeck Blades To Adjust the Deck Cutting Height See Fig To Adjust ANTI-SCALP Rollers See FigureTo Operate Mower To Operate on HillsTo Transport See Fig Before Starting the Engine To Start Engine See FigCheck Engine OIL Level ADD GasolineMowing Tips Before Each USE Maintenance ScheduleGeneral Recommendations Lubrication Chart Operator Presence SystemBlade Care TiresBattery To Sharpen Blade See FigClean AIR Screen Clean AIR INTAKE/COOLING AreasBelts EngineCleaning AIR FilterEngine OIL Filter Spark PlugsService and Adjustment Before Performing ANY Service or AdjustmentsMower To Level DeckFRONT-TO-BACKADJUSTMENTSee Fig To Replace Deck BeltTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Adjust the Seat See Fig To Adjust Control Levers See FigTo Start AN Engine with a Weak Battery To Remove Wheels for RepairTo Adjust Park Brake To Attach Jumper CablesTracking Adjustment Battery StorageFuel System Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Attachment Poor cut unevenWiring Schematic

968999276 / CZ4818BIA specifications

The Husqvarna 968999276, also known as the CZ4818BIA, is a high-performance garden tractor designed for both residential and professional landscaping tasks. Known for its robust build quality and advanced features, this versatile machine offers exceptional performance and user-friendly operation.

One of the key features of the CZ4818BIA is its powerful engine. Equipped with a reliable and efficient petrol engine, it delivers ample horsepower to tackle various mowing tasks with ease. This engine is designed to provide optimal power while ensuring fuel efficiency, making it ideal for long hours of operation without frequent refueling.

The tractor boasts a cutting width of 48 inches, enabling users to cover large areas in a minimal amount of time. Its adjustable cutting height allows for precision mowing, ensuring that users can achieve their desired lawn height for maximum aesthetic appeal. The cutting deck is constructed from durable materials, ensuring longevity and resistance to wear and tear, even when used on challenging terrains.

Another notable feature is its ease of maneuverability. The CZ4818BIA is equipped with a tight turning radius, making it easy to navigate around obstacles such as trees, flower beds, and garden furniture. This feature enhances efficiency, allowing users to mow their lawns without the need for extensive trimming afterward.

The Husqvarna 968999276 includes advanced technological components, such as the Automatic Controlled Transmission (ACT) that allows for smooth and effortless speed changes. This technology enables the operator to focus on mowing rather than constantly adjusting speeds or gears.

Comfort is also a priority in the design of this garden tractor. The seating area is ergonomically designed, featuring a comfortable seat with ample back support. The user-friendly dashboard includes intuitive controls for easy access to all functionalities, allowing for a more enjoyable mowing experience.

Additionally, the CZ4818BIA is compatible with various attachments, including baggers, mulchers, and snow plows, increasing its versatility throughout the year. This adaptability makes it not just a lawn mower but an all-season landscaping tool.

In summary, the Husqvarna 968999276 / CZ4818BIA is an outstanding garden tractor that combines power, efficiency, and user-friendly features. With its durable construction, advanced technologies, and versatility, it stands out as an excellent choice for those seeking a reliable and effective lawn care solution. Whether for residential lawns or professional landscaping, this tractor promises to deliver superior performance and satisfaction.
Top Page Image Contents