Husqvarna 968999276 / CZ4818BIA manual To Adjust ANTI-SCALP, Rollers See Figure, To Operate Mower

Page 14

 

OPERATION

FOOT

ANTI-SCALP

ROLLER

PEDAL

LIFT

 

 

ARM

HEIGHT

 

PLATE

 

FIGURE 5

TO ADJUST ANTI-SCALP

ROLLERS (See Figure 6)

Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti-scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions.

NOTE: Adjust Anti-scalp rollers with the mower on a flat level surface.

Adjust the deck to the desired cutting height (see “TO ADJUST DECK CUTTING HEIGHT” in the operation section of this manual).

Using a 3/4" wrench and a 9/16" wrench, remove the nut and shoulder bolt from the anti-scalp roller.

Lower the anti-scalp roller to the ground, and raise it up to the next highest hole.

Replace and tighten the nut and shoulder bolt.

Be sure to adjust all of the anti-scalp rollers to the same position.

Be sure to readjust the anti-scalp rollers if the cutting height is changed.

FIGURE 6

TO OPERATE MOWER

Your mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the park brake will shut off the engine.

Select desired height of cut.

Start deck blades by pulling the PTO switch up into the engaged position.

To stop the deck blades, press down on the PTO Switch into the disengaged position.

WARNING

Do not operate the deck without either the entire grass catcher, mulch kit or dis- charge chute installed.

TO OPERATE ON HILLS

WARNING

Do not drive up or down hills with slopes greater than 10 degrees. And do not drive across any slopes.

IMPORTANT: THE ANTI-SCALP ROLLERS MUST NOT BE USED FOR GAUGE WHEELS OR THE ROLLER AND DECK MAY BE DAMAGED.

14

Image 14
Contents Operators Manual Models 968999276 / CZ4818BIATechnical Assistance Contents II. Slope Operation Safety RulesGeneral Operation Safe Operation Practices for RIDE-ON MowersSafe Operation Practices for RIDE-ON Mowers Do not III. ServiceIII. Children Safety Rules Specifications Customer ResponsibilitiesTo Remove the Mower from Crate AssemblyTools Required For Assembly Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureIZT Integrated Zeroturn Transaxle Bypass Linkages OperationControls Engine HOW to USE Your MowerDeck Blades To Adjust the Deck Cutting Height See Fig To Operate Mower To Adjust ANTI-SCALPRollers See Figure To Operate on HillsTo Transport See Fig Check Engine OIL Level Before Starting the EngineTo Start Engine See Fig ADD GasolineMowing Tips Before Each USE Maintenance ScheduleGeneral Recommendations Blade Care Lubrication ChartOperator Presence System TiresBattery To Sharpen Blade See FigBelts Clean AIR ScreenClean AIR INTAKE/COOLING Areas EngineEngine OIL Filter CleaningAIR Filter Spark PlugsMower Service and AdjustmentBefore Performing ANY Service or Adjustments To Level DeckFRONT-TO-BACKADJUSTMENTSee Fig To Replace Deck BeltTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Start AN Engine with a Weak Battery To Adjust the Seat See FigTo Adjust Control Levers See Fig To Remove Wheels for RepairTo Adjust Park Brake To Attach Jumper CablesTracking Adjustment Fuel System BatteryStorage Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Attachment Poor cut unevenWiring Schematic

968999276 / CZ4818BIA specifications

The Husqvarna 968999276, also known as the CZ4818BIA, is a high-performance garden tractor designed for both residential and professional landscaping tasks. Known for its robust build quality and advanced features, this versatile machine offers exceptional performance and user-friendly operation.

One of the key features of the CZ4818BIA is its powerful engine. Equipped with a reliable and efficient petrol engine, it delivers ample horsepower to tackle various mowing tasks with ease. This engine is designed to provide optimal power while ensuring fuel efficiency, making it ideal for long hours of operation without frequent refueling.

The tractor boasts a cutting width of 48 inches, enabling users to cover large areas in a minimal amount of time. Its adjustable cutting height allows for precision mowing, ensuring that users can achieve their desired lawn height for maximum aesthetic appeal. The cutting deck is constructed from durable materials, ensuring longevity and resistance to wear and tear, even when used on challenging terrains.

Another notable feature is its ease of maneuverability. The CZ4818BIA is equipped with a tight turning radius, making it easy to navigate around obstacles such as trees, flower beds, and garden furniture. This feature enhances efficiency, allowing users to mow their lawns without the need for extensive trimming afterward.

The Husqvarna 968999276 includes advanced technological components, such as the Automatic Controlled Transmission (ACT) that allows for smooth and effortless speed changes. This technology enables the operator to focus on mowing rather than constantly adjusting speeds or gears.

Comfort is also a priority in the design of this garden tractor. The seating area is ergonomically designed, featuring a comfortable seat with ample back support. The user-friendly dashboard includes intuitive controls for easy access to all functionalities, allowing for a more enjoyable mowing experience.

Additionally, the CZ4818BIA is compatible with various attachments, including baggers, mulchers, and snow plows, increasing its versatility throughout the year. This adaptability makes it not just a lawn mower but an all-season landscaping tool.

In summary, the Husqvarna 968999276 / CZ4818BIA is an outstanding garden tractor that combines power, efficiency, and user-friendly features. With its durable construction, advanced technologies, and versatility, it stands out as an excellent choice for those seeking a reliable and effective lawn care solution. Whether for residential lawns or professional landscaping, this tractor promises to deliver superior performance and satisfaction.