Kenmore 116.3181 Attachment Hose And Wand, Assembly, Pet Handi Mate Tm, Crevice Tool, edge of

ATTACHMENT

HOSE AND WAND

1. insert the tab on

the telescopic wand into the "J"slot on the hose handle.

Twist the telescopic wand 1o lock in

place.

2_ Place the telescop- ic wand in the wand holder and route the hose as shown.

					3. Snap		the
					hose handle
					Into the		hose
					holder	located
					on the	handle
				of the vacuum
					cleaner.
					NOTE:		Be sure
					the raised
					edge of		the
					hose handle
					rests against
					edge	of the
					hose holder,
4. Rotate		the		f
lever	down
and	route	the		_
hose release			Hose
hose as
shown,			cuff_-._
			Hose"-'_'F_
5_ Snap the			Teles_ap;c J_
hose into		the	Wand---_l_-
hose cuff		on	Wand		I Jt
the side of			Holder---J		I J
the vacuum			Hose	._'_
cleaner

Laver_-"_'k_

. i

Do not operate the agitator without the wand properly inserted into the wand holder and the hose handle properly

secured in the hose holder J

ASSEMBLY]

6. Rotate the hose release lever

upwards to lock the hose in place.

PET HANDI MATE TM

For operation of Pet Handi Mate TM see separate Use & Care Guide.

1.Place Pet

Handi	Mate TM		Pet
into the storage			Mate'"
area_
2_ Rotate the Pet
Handi	Mate r_
back	until	it
snaps into		place_

CREVICE TOOL

1. insert the crevice toof into the holder on the side of the vacu- um cleaner as shown,

COMBINATION BRUSH

1_ Insert the

combination Combln_tlon

brush into Brush the holder

on the back of the

Vacuum

cleaner as shown.,