MOTOR PROTECTION SYSTEM
Thermal Protector - Suction Motor This vacuum cleaner has a thermal
protector which automatically trips to protect the vacuum cleaner suction motor° If a clog prevents the normal flow of air to the motor, the thermal protector turns the motor off automatically. This allows the motor to cool in order to prevent possible damage to the vacuum cleaner°
Thermal Prolector - Agitator Motors This vacuum cleaner has thermal
protectors which automatically trip to protect the agitator motors,The therma! protectors turn the motors off automatically. This allows the motors to
cool in order to prevent possible damage to the vacuum cleanen
To reset thermal protectors: Turn the vacuum cleaner off and unplug the power cord from the outlet to allow the vacuum cleaner to cool and the thermal
protectors to reset.
CAUTION
Always return the vaccum cleaner to the upright position before using the hose and attachements_ Failure to do so may
result in overheating of the agitator motors and can cause the thermal
protectors to trip. | ................... |
Check for and remove clogs, and replace bag if necessary. See CLOG REMOVAL section, Also check and replace any clogged filters. Wait approximately
Motor Profector
This vacuum cleaner has a motor
protector
clog prevents normal air flow to the vacuum cleaner suction moton You will
notice a change of sound as air rushes through the valve opening.
To correct problem, install a new dust bag, if using attachments, adjust to allow for greater air flowo
NOTE: The motor protector may open when using aflachments or when cleaning new carpet due to reduced airflow caused by the attachments themselves or by new carpet llnt filling the dust bag quickly.
NOTE: Do not block motor protector.
14
