_WARNING
Electrical Shock And Personal Injury Hazard
Disconnect electrical suppty before per-
forming maintenance to the vacuum cleaner. Failure to do so could result in
electrical shock or personal injury from vacuum cleaner suddenly slarting,
AGITATOR OVERLOAD
PROTECTOR
The agitator has
protector | shuts off | ffese! | |
agitator | overload | Agitator_..._. | |
the agitator | motors. | Bullon | |
The vacuum | cleaner | ||
suction motor will continue to run,
To correct problem: Turn off and unplug vacuum cleaner,
remove obstruction, then press AGITATOR RESET BUTTON,
NOTE: A MtNIMUM OF 20 SECONDS NEEDS TO PASS BEFORE RESETTING
OVERLOAD,
If the problem persists, have the vacuum cleaner serviced by a Sears or other qualified technician°
DIRT SENSOR
The electronic dirt sensor is a feature which will detect particles as they pass through the vacuum cleaner.
The dirt sensor indicators are located on the nozzle of the vacuum cleaner,
°When little or no dirt is present the
dirt sensor is green_
*With medium or heavy concentration the dirt sensor is red°
OPERATION
As you vacuum, the red indicator light will come on and stay on as long as the sensor detects a high concentration of
particles passing through the vacuum cleaner,
TO CLEAN DIRT SENSOR OPTICS
The dirt sensor optics consist of two optic cells located inside the dust bag port_ Occasionally, it may become necessary to clean the two optic cells to assure maximum performance°
It is recommended the optic cells be cleaned:
•When the red light stays on continuously.
•When dirt or dust adheres to the optic cells.
•Whenever the dust bag is removed_
Optic Ceils
To clean the sensor, wipe the optic cells with a soft, dry cloth_ Never use cleaners or liquids as they can help speed the recoatlng of the optic cells and make it necessary to clean them much sooner than normal, The dirt sensor area can be
reached by removing the dust bag,
13
