PILE HEIGHT SELECTION AND SETTING
To select a pile height setting: |
| |
Select a pile height setting by pressing |
| |
the HEIGHT ADJUST pedal on the side of |
| |
the nozzle_ The pile height setting shows |
| |
on the indicator | window_ See SUGGESTED | EIGHT |
PILE HEIGHT SETTINGS. | ADJUST | |
|
| Pedal |
Attention: Refer to your carpet | color | |
Window | ||
manufacturers | cleaning |
|
recommendations. | Some more delicate |
|
carpets may require that they be |
| |
vacuumed with the agitator turned off to |
| |
prevent carpet | damage° |
|
SUGGESTED PILE HEIGHT SETTINGS
There are four (4) pile height settings on the vacuum cleanen l:or best deep down cleaning, use the XLO setting, However, you may need to rals_ the helght to make some jobs easier, such as scatter rugs and some deep pile carpets, and to prevent the vacuum cleaner from shutting off.
Suggested settings are:
HI - Shag, deep pite, or scatter rugs_
MED - Medium to deep pile.
LO - Low to medium pile_
XLO - Most carpets, bare floors, and delicate carpets that require agitator to be turned off.
CHECK BAG INDICATOR
When the vacuum cleaner _srunning with normal air flow, the light on the CHECK
BAG indicator Is off. The light comes on whenever the airflow becomes blocked_ If
that occurs, check the d_sposable dust bag,
motor safety filter and other possible ctog locations shown in CLOG REMOVAL.
NOTE: It is normal for the CHECK BAG
indicator to come on when using certain attachments, due to reduced airflow
through attachment=, No maintenance is required°
