User Manual BDL4251V
Power Indicator
|
|
| Status |
Power ON | Green |
Power Standby | Red |
Power OFF | LED Off |
Diagnosis | Red Blinking |
(Detecting failure) | * See troubleshooting |
Using Power Management
Please turn off the LCD monitor when it will not be used for long time.This could potentially increase the life and decrease the power consumption of the LCD monitor.
Standby mode: Push the power button on the remote control or on the monitor to enter the standby mode.
Power Off: Push the Main Power Switch to enter the power off mode.
Display Signal of Video Source Setting to [VIDEO]
Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO].
Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.
Picture Size
HDMI, | FULL | NORMAL | CUSTOM | |||||||
|
|
|
|
|
| REAL |
|
|
|
|
|
|
|
|
|
|
|
| |||
COMPONENT,VIDEO | FULL | NORMAL | DYNAMIC | |||||||
|
|
|
|
| REAL | CUSTOM |
|
| ||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| |
Signal Type | NORMAL SIZE |
|
|
| Recommended Size | |||||
|
|
|
| NORMAL |
|
|
|
|
| |
4:3
DYNAMIC
FULL
Squeeze
NORMAL: Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at COMPONENT or VIDEO signal.
FULL: Display in the entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with
CUSTOM (ZOOM): Images can be expanded beyond the active display area.The image which is outside of the active display area would not be shown.
REAL: Image will be displayed for one by one pixel.
ZOOM
ZOOM
25
