Husqvarna 445 EPA II, 445e EPA II, 450e EPA II manual Fueling, Fuel safety, Transport and storage

Page 19

FUEL HANDLING

Fueling

WARNING! Taking the following precautions,

!will lessen the risk of fire:

Do not smoke and do not place any hot objects in the vicinity of fuel.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

Clean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at least once a year. Contamination in the tanks causes malfunction. Make sure the fuel is well mixed by shaking the container before refuelling. The capacities of the chain oil tank and fuel tank are carefully matched. You should therefore always fill the chain oil tank and fuel tank at the same time.

WARNING! Fuel and fuel vapor are highly

!flammable.Take care when handling fuel and chain oil. Be aware of the risks of fire, explosion and those associated with inhalation.

Fuel safety

•Never refuel the machine while the engine is running.

•Make sure there is plenty of ventilation when refuelling or mixing fuel (gasoline and 2-stroke oil).

•Move the machine at least 10 ft (3 m) from the refuelling point before starting it.

•Never start the machine:

1If you have spilled fuel or chain oil on the machine. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

WARNING! Never use a machine with visible

!damage to the spark plug guard and ignition cable. A risk of sparking arises, which can cause a fire.

Transport and storage

•Always store the chain saw and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric motors, relays/switches, boilers and the like.

•Always store fuel in an approved container designed for that purpose.

•For longer periods of storage or for transport of the chain saw, the fuel and chain oil tanks should be emptied. Ask where you can dispose of waste fuel and chain oil at your local gas station.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The bar guard must always be fitted to the cutting attachment when the machine is being transported or in storage, in order to prevent accident contact with the sharp chain. Even a non-moving chain can cause serious cuts to yourself or persons you bump into with an exposed chain.

•Remove the spark plug cap from the spark plug. Activate the chain brake.

Long-term storage

Empty the fuel/oil tanks in a well ventilated area. Store the fuel in approved cans in a safe place. Fit the bar guard. Clean the machine. See instructions under the heading Maintenance schedule.

English – 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents English EPA II 445e EPA 450e EPASymbols on the machine KEY to SymbolsSymbols in the operator’s manual Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Before using a new chain saw General Safety PrecautionsAlways use common sense Personal protective equipment Machine′s safety equipmentChain brake and front hand guard General Safety Precautions Vibration damping system Throttle lockoutChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerCutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge settingSharpening cutting teeth General advice on adjusting depth gauge setting445e, 450e Adjustment of depth gauge settingTensioning the chain 445Checking chain lubrication Lubricating cutting equipmentChain oil Filling with chain oilNeedle bearing lubrication Chain drive sprocketChecking wear on cutting equipment 445e, 450e AssemblyFitting the bar and chain 445Assembly Fuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules Limbing Basic cutting techniqueGeneral TermsClearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling directionDirectional cuts FellingWhat is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Carburetor adjustment MaintenanceGeneral Checking the brake trigger Checking the inertia brake releaseMuffler Replacing the return and drive springs StarterReplacing the starter cord Tensioning the recoil springNeedle bearing lubrication Air filterSpark plug Lubricating the bar tip sprocketWinter use Air Injection centrifugal cleaningTemperature -5C 23F or colder Cooling systemDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsYour Warranty Rights and Obligations Federal Emission Control Warranty StatementOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautions1150341-95 ´z+RB3¶55¨ ´z+RB3¶55¨

445 EPA II, 445e EPA II, 450e EPA II specifications

Husqvarna is a name synonymous with power and durability, especially when it comes to its line of chainsaws like the Husqvarna 445 EPA II, 445e EPA II, and 450e EPA II. These models combine advanced technology and ergonomic design to fulfill the needs of both professional users and homeowners.

The Husqvarna 445 EPA II chainsaw is designed for versatility and ease of use. It boasts a 45.7cc engine, providing a balance of power and weight ideal for various cutting tasks. The chainsaw features Husqvarna’s X-Torq engine technology, which reduces emissions and improves fuel efficiency. This means less downtime for refueling and a smaller ecological footprint, making it environmentally friendly. Additionally, the LowVib system minimizes vibration, which translates to reduced user fatigue over long periods of use.

The 445e EPA II takes similar principles and enhances them with increased efficiency and usability. This model includes the Air Injection system, which helps filter out larger dust and debris particles before reaching the air filter, ensuring consistent performance and a longer lifespan for the machine. Its lightweight design makes it easier to maneuver while the front handle is ergonomically shaped for a secure grip. The easy-start feature allows users to get going quickly with minimal effort.

Moving up the line, the Husqvarna 450e EPA II offers more power, featuring a slightly larger engine and an improved cutting capacity. This model is perfect for heavy-duty tasks, from felling trees to cutting firewood. Like its predecessors, it employs X-Torq engine technology and also includes the Quick Release Air Filter, making maintenance easier and faster. The robust design and advanced security features—such as the inertia-activated chain brake—ensure safe operation even under challenging conditions.

Overall, the Husqvarna 445 EPA II, 445e EPA II, and 450e EPA II chainsaws represent a commitment to safety, efficiency, and user comfort. The integration of modern technological features, coupled with Husqvarna's reputation for quality workmanship, makes these chainsaws ideal choices for anyone looking to tackle a range of outdoor cutting applications with confidence.
Top Page Image Contents