Husqvarna 532 42 32-01 owner manual To Operate Mower See Fig, Reverse Operation System ROS See Fig

Page 11

OPERATION

TO OPERATE MOWER (See Fig. 10)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

1.Select desired height of cut with attachment lift lever.

2.Start mower blades by engaging attachment clutch.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION:Donotoperatethemowerwithout

eithertheentiregrasscatcher,onmowersso equipped,orthedeflectorshield(S)inplace.

S

FIG. 10

REVERSE OPERATION SYSTEM (ROS) (See Fig. 11)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless

absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

Only use if you are certain no children or other bystanders will enter the mowing area.

•Depress brake pedal all the way down.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

 

8

 

0282

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

FIG. 11

•Look down and behind before and while backing.

•Slowly depress reverse drive pedal to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake position and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowlydepressappropriatedrivepedaltoslowestsetting.

•Make all turns slowly.

TO TRANSPORT (See Figs. 3 and 12)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

•Raise attachment lift to highest position with attachment lift control.

•Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

TRANSMISSION ENGAGED

TRANSMISSION DISENGAGED

FIG. 12

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents YTH20K46 II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General OperationIV. Towing ServiceGeneral Service III. ChildrenTable of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from CartonCheck Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsOperation Know Your Tractor Stopping See Fig HOW to USE Your TractorAttachment Clutch Switch Disengaged Engaged To SET Parking Brake See FigTo Move Forward and Backward See Fig To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig System CharacteristicsTo Operate on Hills Using the Reverse Operation SystemTo Operate Mower See Fig Reverse Operation System ROS See FigADD Gasoline Service REMINDER/HOUR MeterBefore Starting the Engine Check Engine OIL LevelPurge Transmission Mowing TipsLubrication Chart MaintenanceBlade Removal See Fig BatteryTractor Blade CareEngine IN-LINE Fuel Filter See Fig CleaningMuffler Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Install belt on engine pulley M To Level Mower Visual SIDE-TO-SIDE Adjustment See FigTo Replace Motion Drive Belt See Fig Belt InstallationTo Replace Mower Blade Drive Belt See Fig To Check BrakeTo Remove Wheel for Repairs See Fig To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig Front Wheel TOE-IN/CAMBERTransmission Engine OIL StorageOther Fuel SystemProblem Cause Correction Troubleshooting PointsEngine dies when Tractor - Model Number YTH20K46 96045000409, Product no 45 SchematicElectrical KEY Part Description Chassis Tractor - Model Number YTH20K46 96045000409, Product no 45 Drive Tractor - Model Number YTH20K46 96045000409, Product no 45 Engine Spark Arrester KITEngine Kohler Model No. SV600 Prem Husq SR Steering AssemblyTractor - Model Number YTH20K46 96045000409, Product no 45 Wheels and Tires Decals532 40 Seat Seat AssemblyMower Deck KEY Part NO. no Description 100 Mower LiftLimited Warranty Husqvarna S Obligations Under the Warranty 532 42 32-01 Rev 12.01.08 BAD

532 42 32-01, 96045000409 specifications

The Husqvarna 96045000409,532 42 32-01 is a highly versatile lawn mower that brings innovation and efficiency to your yard maintenance tasks. Designed for homeowners who seek ease of use combined with high performance, this model stands out as an effective solution for maintaining lawns of various sizes.

One of the main features of this lawn mower is its powerful engine. Equipped with a high-quality gasoline engine, the Husqvarna 96045000409 ensures that you have the necessary power to cut through thick grass and tougher terrain, making it suitable for both small and larger areas. The model's robust construction provides durability, ensuring that it can withstand the rigors of regular use.

The mower features a cutting width of 42 inches, allowing for wider cutting paths and reducing the time spent mowing. The adjustable cutting height allows users to choose the preferred grass length, which can be particularly useful for achieving a professional-looking lawn. With multiple height settings, users can adapt to different grass types and seasonal needs effectively.

Another notable characteristic is its self-propelling capability. The Husqvarna 96045000409 comes with an advanced drive system that propels the mower forward, reducing the physical effort required by the operator. This feature is particularly useful on sloped terrains or uneven lawns, where pushing a traditional mower could be cumbersome.

The mower is designed with user comfort in mind. Its ergonomic handle provides a secure grip and minimizes vibrations during operation, which can lead to fatigue. Furthermore, the mower is equipped with a reliable bagging system that efficiently collects grass clippings, ensuring that your lawn maintains a clean and manicured appearance.

In terms of technology, this mower incorporates Husqvarna's advanced engineering, promising exceptional performance. The model's design also emphasizes easy maintenance, featuring easily accessible components that simplify tasks such as oil changes and blade replacements.

Overall, the Husqvarna 96045000409,532 42 32-01 is an excellent choice for homeowners who value performance, ease of use, and durability in their lawn care equipment. Whether you have a sprawling yard or a modest lawn, this mower is engineered to meet your gardening needs and deliver outstanding results, season after season.
Top Page Image Contents