Husqvarna 96045000409, 532 42 32-01 To Level Mower, Visual SIDE-TO-SIDE Adjustment See Fig

Page 20

SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. X1)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

 

FIG. X1

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. X2)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

 

02966

A

A

FIG. X2

•If adjustment is necessary, see step in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. X3 & X4) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

02548

BB

FIG. X3

•If front tip of blade is not 1/8" to 1/2" lower than the rear tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

TIGHTEN ADJUST

LOOSEN

ADJUST NUT

NUT B TO RAISE

B TO LOWER

MOWER

 

02950

MOWER

 

 

LOOSEN JAM NUT A FIRST

 

FIG. X4

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents YTH20K46 Safety Rules Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationService General ServiceIII. Children IV. TowingTable of Contents Assembly Unassembled PartsTo Remove Tractor from Carton Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor Attachment Clutch Switch Disengaged EngagedTo SET Parking Brake See Fig Stopping See FigTo Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigSystem Characteristics To Move Forward and Backward See FigUsing the Reverse Operation System To Operate Mower See FigReverse Operation System ROS See Fig To Operate on HillsService REMINDER/HOUR Meter Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Purge TransmissionMaintenance Lubrication ChartBattery TractorBlade Care Blade Removal See FigEngine Cleaning MufflerSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Install belt on engine pulley M Visual SIDE-TO-SIDE Adjustment See Fig To Level MowerBelt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Replace Motion Drive Belt See FigTo Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTransmission Storage OtherFuel System Engine OILTroubleshooting Points Problem Cause CorrectionEngine dies when Schematic Tractor - Model Number YTH20K46 96045000409, Product no 45Electrical KEY Part Description Chassis Tractor - Model Number YTH20K46 96045000409, Product no 45 Drive Tractor - Model Number YTH20K46 96045000409, Product no 45 Spark Arrester KIT EngineEngine Kohler Model No. SV600 Steering Assembly Prem Husq SRTractor - Model Number YTH20K46 96045000409, Product no 45 Decals Wheels and TiresSeat Assembly 532 40 SeatMower Deck KEY Part NO. no Description Mower Lift 100Limited Warranty Husqvarna S Obligations Under the Warranty 532 42 32-01 Rev 12.01.08 BAD

532 42 32-01, 96045000409 specifications

The Husqvarna 96045000409,532 42 32-01 is a highly versatile lawn mower that brings innovation and efficiency to your yard maintenance tasks. Designed for homeowners who seek ease of use combined with high performance, this model stands out as an effective solution for maintaining lawns of various sizes.

One of the main features of this lawn mower is its powerful engine. Equipped with a high-quality gasoline engine, the Husqvarna 96045000409 ensures that you have the necessary power to cut through thick grass and tougher terrain, making it suitable for both small and larger areas. The model's robust construction provides durability, ensuring that it can withstand the rigors of regular use.

The mower features a cutting width of 42 inches, allowing for wider cutting paths and reducing the time spent mowing. The adjustable cutting height allows users to choose the preferred grass length, which can be particularly useful for achieving a professional-looking lawn. With multiple height settings, users can adapt to different grass types and seasonal needs effectively.

Another notable characteristic is its self-propelling capability. The Husqvarna 96045000409 comes with an advanced drive system that propels the mower forward, reducing the physical effort required by the operator. This feature is particularly useful on sloped terrains or uneven lawns, where pushing a traditional mower could be cumbersome.

The mower is designed with user comfort in mind. Its ergonomic handle provides a secure grip and minimizes vibrations during operation, which can lead to fatigue. Furthermore, the mower is equipped with a reliable bagging system that efficiently collects grass clippings, ensuring that your lawn maintains a clean and manicured appearance.

In terms of technology, this mower incorporates Husqvarna's advanced engineering, promising exceptional performance. The model's design also emphasizes easy maintenance, featuring easily accessible components that simplify tasks such as oil changes and blade replacements.

Overall, the Husqvarna 96045000409,532 42 32-01 is an excellent choice for homeowners who value performance, ease of use, and durability in their lawn care equipment. Whether you have a sprawling yard or a modest lawn, this mower is engineered to meet your gardening needs and deliver outstanding results, season after season.
Top Page Image Contents