Husqvarna 532 42 32-01, 96045000409 Cleaning, Muffler, Spark Plugs, IN-LINE Fuel Filter See Fig

Page 17

MAINTENANCE

MUFFLER

Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or dam- age.

SPARK PLUGS

Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “PRODUCT SPECIFICATIONS” section of this manual.

IN-LINE FUEL FILTER (See Fig. 18)

The fuel filter should be replaced once each season. If fuel filter becomes clogged, obstructing fuel flow to carburetor, replacement is required.

•With engine cool, remove filter and plug fuel line sec- tions.

•Place new fuel filter in position in fuel line with arrow pointing towards carburetor.

•Be sure there are no fuel line leaks and clamps are properly positioned.

•Immediately wipe up any spilled gasoline.

CLAMP

FUEL FILTER

FIG. 18

CLEANING

•Clean engine, battery, seat, finish, etc. of all foreign matter.

•Keep finished surfaces and wheels free of all gasoline, oil, etc.

•Protect painted surfaces with automotive type wax.

We do not recommend using a garden hose or pressure washer to clean your tractor unless the engine and trans- mission are covered to keep water out. Water in engine or transmission will shorten the useful life of your tractor. Use compressed air or a leaf blower to remove grass, leaves and trash from tractor and mower.

DECK WASHOUT PORT (See Fig. 19)

Your tractor’s deck is equipped with a washout port on its surface as part of its deck wash system. It should be utilized after each use.

1.Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.

IMPORTANT: Make certain the tractor’s discharge chute is directed AWAY from your house, garage, parked cars, etc. Remove bagger chute or mulch cover if attached.

2.Make sure the PTO (Blade Engage) is not engaged, set the parking brake, and stop the engine.

3.Thread the nozzle adapter (packaged with your tractor’s Operator’s Manual) onto the end of your garden hose.

4.Pull back the lock collar of the nozzle adapter and push the adapter onto the deck washout port at the left end of the mower deck. Release the lock collar to lock the adapter on the nozzle.

HOSE

NOZZLE ADAPTER

WASHOUT

PORT

Fig. 19

IMPORTANT: Tug hose ensuring connection is secure.

5.Turn the water on.

6.While sitting in the operator’s position on the tractor, re-start the engine and place the throttle lever in the Fast " " position.

IMPORTANT: Recheck the area making certain the area is clear.

7.Move the tractor’s PTO (Blade Engage) to the ON position. Remain in the operator’s position with the cutting deck engaged until the deck is cleaned.

8.Move the tractor’s PTO (Blade Engage) to the OFF position. Turn the ignition key to the STOP position to turn the tractor’s engine off. Turn the water off.

9.Pull back the lock collar of the nozzle adapter to dis- connect the adapter from the nozzle washout port.

10.Move the tractor to a dry area, preferably a concrete or paved area. Engage the mower deck PTO to remove ex- cesswater andtohelpdry beforeputtingthetractoraway.

WARNING: A broken or missing washout fitting could expose you or others to thrownobjectsfromcontactwiththeblade.

•Replace broken or missing washout fitting immediately, prior to using mower again.

•Pluganyholesinmowerwithboltsandlocknuts.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents YTH20K46 Safe Operation Practices for Ride-On Mowers Safety RulesGeneral Operation II. Slope OperationGeneral Service ServiceIII. Children IV. TowingTable of Contents Unassembled Parts AssemblyTo Remove Tractor from Carton Unpack CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor Attachment Clutch Switch Disengaged Engaged HOW to USE Your TractorTo SET Parking Brake See Fig Stopping See FigTo Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigSystem Characteristics To Move Forward and Backward See FigTo Operate Mower See Fig Using the Reverse Operation SystemReverse Operation System ROS See Fig To Operate on HillsBefore Starting the Engine Service REMINDER/HOUR MeterCheck Engine OIL Level ADD GasolinePurge Transmission Mowing TipsLubrication Chart MaintenanceTractor BatteryBlade Care Blade Removal See FigEngine Muffler CleaningSpark Plugs IN-LINE Fuel Filter See FigTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Figs Install belt on engine pulley M To Level Mower Visual SIDE-TO-SIDE Adjustment See FigTo Replace Mower Blade Drive Belt See Fig Belt InstallationTo Check Brake To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery See Fig To Adjust Steering Wheel AlignmentFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTransmission Other StorageFuel System Engine OILProblem Cause Correction Troubleshooting PointsEngine dies when Tractor - Model Number YTH20K46 96045000409, Product no 45 SchematicElectrical KEY Part Description Chassis Tractor - Model Number YTH20K46 96045000409, Product no 45 Drive Tractor - Model Number YTH20K46 96045000409, Product no 45 Engine Spark Arrester KITEngine Kohler Model No. SV600 Prem Husq SR Steering AssemblyTractor - Model Number YTH20K46 96045000409, Product no 45 Wheels and Tires Decals532 40 Seat Seat AssemblyMower Deck KEY Part NO. no Description 100 Mower LiftLimited Warranty Husqvarna S Obligations Under the Warranty 532 42 32-01 Rev 12.01.08 BAD

532 42 32-01, 96045000409 specifications

The Husqvarna 96045000409,532 42 32-01 is a highly versatile lawn mower that brings innovation and efficiency to your yard maintenance tasks. Designed for homeowners who seek ease of use combined with high performance, this model stands out as an effective solution for maintaining lawns of various sizes.

One of the main features of this lawn mower is its powerful engine. Equipped with a high-quality gasoline engine, the Husqvarna 96045000409 ensures that you have the necessary power to cut through thick grass and tougher terrain, making it suitable for both small and larger areas. The model's robust construction provides durability, ensuring that it can withstand the rigors of regular use.

The mower features a cutting width of 42 inches, allowing for wider cutting paths and reducing the time spent mowing. The adjustable cutting height allows users to choose the preferred grass length, which can be particularly useful for achieving a professional-looking lawn. With multiple height settings, users can adapt to different grass types and seasonal needs effectively.

Another notable characteristic is its self-propelling capability. The Husqvarna 96045000409 comes with an advanced drive system that propels the mower forward, reducing the physical effort required by the operator. This feature is particularly useful on sloped terrains or uneven lawns, where pushing a traditional mower could be cumbersome.

The mower is designed with user comfort in mind. Its ergonomic handle provides a secure grip and minimizes vibrations during operation, which can lead to fatigue. Furthermore, the mower is equipped with a reliable bagging system that efficiently collects grass clippings, ensuring that your lawn maintains a clean and manicured appearance.

In terms of technology, this mower incorporates Husqvarna's advanced engineering, promising exceptional performance. The model's design also emphasizes easy maintenance, featuring easily accessible components that simplify tasks such as oil changes and blade replacements.

Overall, the Husqvarna 96045000409,532 42 32-01 is an excellent choice for homeowners who value performance, ease of use, and durability in their lawn care equipment. Whether you have a sprawling yard or a modest lawn, this mower is engineered to meet your gardening needs and deliver outstanding results, season after season.
Top Page Image Contents