Husqvarna 960430173 owner manual Other, Fuel System, Engine OIL, Cylinders

Page 24

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

WARNING: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

Clean entire tractor (See “CLEANING” in the Maintenance section of this manual).

Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments section of this manual).

Lubricate as shown in the Maintenance section of this manual.

Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

Fully charge the battery for storage.

After a period of time in storage, battery may require recharging.

To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Maintenance section of this manual).

After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and let it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER(S)

Remove spark plug(s).

Pour one ounce of oil through spark plug hole(s) into cylinder(s).

Turn ignition key to “START” position for a few seconds to distribute oil.

Replace with new spark plug(s).

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your tractor indoors and cover it to give protection from dust and dirt.

Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

24

Image 24
Contents YTH22V42 Safety Rules Safe Operation Practices for Ride-On MowersGeneral Service III. ChildrenSafe Handling of Gasoline Table of Contents Tools Required for Assembly ToremovetractorfromcartonBefore Removing Tractor from Skid Unpack CartonCheck Tire Pressure Check Deck LevelnessCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Mower Cutting Height See Fig To Adjust Gauge Wheels See FigTo USE Cruise Control J See Fig To Operate MowerService REMINDER/HOUR Meter Using the Reverse Operation SystemReverse Operation System ROS To Operate on HillsBefore Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See FigMowing Tips Purge TransmissionRunning Maintenance Lubrication ChartGeneral Recommendations ScheduleBattery TractorBlade Care Blade Removal See FigEngine Cleaning MufflerIN-LINE Fuel Filter See Fig Deck Washout Port See FigTo Install Mower See Fig To Remove Mower See FigInstall belt on engine pulley M, in belt keepers G To Level Mower Belt Installation To Replace Mower Blade Drive Belt See FigTo Check Brake To Replace Motion Drive Belt See FigTo Start Engine with a Weak Battery See Fig Replacing Battery See FigTo Remove Wheel See Fig Front Wheel TOE-IN/CAMBERTransmission Other Fuel SystemEngine OIL CylindersProblem Cause Correction To run when oper Battery will notFires when turn Engine continuesSchematic Tractor - Model Number YTH22V42 96043010000, Product no 43Electrical KEY Part Description Chassis Tractor - Model Number YTH22V42 96043010000, Product no 43 Drive Washer Harden .793 x 1.637 x Engine Engine Power Rating Information Steering Assembly Tractor - Model Number YTH22V42 96043010000, Product no 43 Mower Deck 532 40 Mower Housing KEY Part NO. NO. DescriptionMower Lift 100 101Seat Assembly 532 42 SeatDecals Wheels and TiresSuggested Guide for Sighting Slopes for Safe Operation Only Ride UP and Down Hill Not Across Hill Degrees MAX02.13.12 JA/TH

960430173 specifications

The Husqvarna 960430173 is a versatile and powerful lawn mower designed for both residential and semi-professional use. With its robust construction and high-performance features, this mower is ideal for tackling a variety of lawn care tasks efficiently.

One of the standout characteristics of the Husqvarna 960430173 is its cutting system. This mower features a durable steel cutting deck that comes in various sizes, allowing users to choose the perfect width for their mowing needs. The optimally designed blades ensure a clean and precise cut, promoting healthy grass growth. Its adjustable cutting height provides flexibility, allowing users to customize the grass length according to their preferences.

Equipped with advanced technology, this model features a reliable and efficient engine that delivers powerful performance. The engine is designed for smooth operation, ensuring that the mower can handle tough conditions without compromising on power. Moreover, its fuel-efficient design reduces the frequency of refueling, making it more convenient for users.

The Husqvarna 960430173 is also designed with user comfort in mind. It boasts ergonomic handles that provide a comfortable grip, reducing fatigue during extended mowing sessions. The mower’s lightweight design facilitates easy maneuverability, allowing users to navigate around tight corners and obstacles within the yard.

Another notable feature of this mower is its innovative safety mechanisms. The mower is equipped with a blade brake system that stops the blades quickly when the user releases the handle, enhancing safety while in operation. This feature is particularly important for households with children or pets.

For those who appreciate technological advancements, the Husqvarna 960430173 offers compatibility with smart technology solutions. Certain models can be paired with Husqvarna's smart garden solutions, providing users with real-time information about their lawn care needs through a smartphone application. This feature allows for better lawn management and optimization of maintenance schedules.

In conclusion, the Husqvarna 960430173 is a powerful lawn mower that combines efficiency, comfort, and advanced technology. Its high-quality construction ensures durability, while its user-friendly features make lawn care a breeze. Whether for residential use or semi-professional applications, this mower delivers exceptional performance, making it a valuable tool for any lawn enthusiast.