Husqvarna 960430173 owner manual Mowing Tips, Purge Transmission, Running

Page 13

OPERATION

PURGE TRANSMISSION

CAUTION: Never engage or disengage freewheel lever while the engine is

running.

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have devel- oped during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REINSTALLATION BEFORE OPERATING THE TRACTOR.

•Place tractor safely on level surface with engine off and parking brake set.

•Disengage transmission by placing freewheel control in freewheeling position (See “TO TRANSPORT” in this section of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. Dis- engage parking brake

•Depress forward drive pedal to full forward position, hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position, hold for five

(5) seconds and release pedal. Repeat this procedure three (3) times.

NOTE: During this procedure there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

•Shut- off engine and set parking brake.

•Engage transmission by placing freewheel control in engaged position (See “TO TRANSPORT” in this sec- tion of manual).

•Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed. Disengage parking brake.

•Drive tractor forward for approximately five feet then backwards for five feet. Repeat this driving procedure three times.

Your transmission is now purged and now ready for normal operation.

MOWING TIPS

•Mower should be properly leveled for best mowing performance. See “TO LEVEL MOWER HOUSING” in the Service and Adjustments section of this manual.

•The left hand side of mower should be used for trim- ming.

•Drive so that clippings are discharged onto the area that has been cut. Have the cut area to the right of the machine. This will result in a more even distribution of clippings and more uniform cutting.

•When mowing large areas, start by turning to the right so that clippings will discharge away from shrubs, fences, driveways, etc. After one or two rounds, mow in the opposite direction making left hand turns until finished (See Fig. 12).

Fig. 12

•If grass is extremely tall, it should be mowed twice to reduce load and possible fire hazard from dried clip- pings. Make first cut relatively high; the second to the desired height.

•Do not mow grass when it is wet. Wet grass will plug mower and leave undesirable clumps. Allow grass to dry before mowing.

•Always operate engine at full throttle when mow- ing to assure better mowing performance and proper discharge of material. Regulate ground speed by selecting a low enough gear to give the mower cutting performance as well as the quality of cut desired.

•When operating attachments, select a ground speed that will suit the terrain and give best performance of the attachment being used.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents YTH22V42 Safe Operation Practices for Ride-On Mowers Safety RulesIII. Children General ServiceSafe Handling of Gasoline Table of Contents Toremovetractorfromcarton Tools Required for AssemblyBefore Removing Tractor from Skid Unpack CartonCheck Deck Levelness Check Tire PressureCheck for Proper Position of ALL Belts Check Brake SystemOperation Know Your Tractor HOW to USE Your Tractor To Adjust Gauge Wheels See Fig To Adjust Mower Cutting Height See FigTo USE Cruise Control J See Fig To Operate MowerUsing the Reverse Operation System Service REMINDER/HOUR MeterReverse Operation System ROS To Operate on HillsCheck Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See FigPurge Transmission Mowing TipsRunning Lubrication Chart MaintenanceGeneral Recommendations ScheduleTractor BatteryBlade Care Blade Removal See FigEngine Muffler CleaningIN-LINE Fuel Filter See Fig Deck Washout Port See FigTo Remove Mower See Fig To Install Mower See FigInstall belt on engine pulley M, in belt keepers G To Level Mower To Replace Mower Blade Drive Belt See Fig Belt InstallationTo Check Brake To Replace Motion Drive Belt See FigReplacing Battery See Fig To Start Engine with a Weak Battery See FigTo Remove Wheel See Fig Front Wheel TOE-IN/CAMBERTransmission Fuel System OtherEngine OIL CylindersProblem Cause Correction Battery will not To run when operFires when turn Engine continuesTractor - Model Number YTH22V42 96043010000, Product no 43 SchematicElectrical KEY Part Description Chassis Tractor - Model Number YTH22V42 96043010000, Product no 43 Drive Washer Harden .793 x 1.637 x Engine Engine Power Rating Information Steering Assembly Tractor - Model Number YTH22V42 96043010000, Product no 43 Mower Deck KEY Part NO. NO. Description 532 40 Mower Housing100 101 Mower Lift532 42 Seat Seat AssemblyWheels and Tires DecalsOnly Ride UP and Down Hill Not Across Hill Degrees MAX Suggested Guide for Sighting Slopes for Safe Operation02.13.12 JA/TH

960430173 specifications

The Husqvarna 960430173 is a versatile and powerful lawn mower designed for both residential and semi-professional use. With its robust construction and high-performance features, this mower is ideal for tackling a variety of lawn care tasks efficiently.

One of the standout characteristics of the Husqvarna 960430173 is its cutting system. This mower features a durable steel cutting deck that comes in various sizes, allowing users to choose the perfect width for their mowing needs. The optimally designed blades ensure a clean and precise cut, promoting healthy grass growth. Its adjustable cutting height provides flexibility, allowing users to customize the grass length according to their preferences.

Equipped with advanced technology, this model features a reliable and efficient engine that delivers powerful performance. The engine is designed for smooth operation, ensuring that the mower can handle tough conditions without compromising on power. Moreover, its fuel-efficient design reduces the frequency of refueling, making it more convenient for users.

The Husqvarna 960430173 is also designed with user comfort in mind. It boasts ergonomic handles that provide a comfortable grip, reducing fatigue during extended mowing sessions. The mower’s lightweight design facilitates easy maneuverability, allowing users to navigate around tight corners and obstacles within the yard.

Another notable feature of this mower is its innovative safety mechanisms. The mower is equipped with a blade brake system that stops the blades quickly when the user releases the handle, enhancing safety while in operation. This feature is particularly important for households with children or pets.

For those who appreciate technological advancements, the Husqvarna 960430173 offers compatibility with smart technology solutions. Certain models can be paired with Husqvarna's smart garden solutions, providing users with real-time information about their lawn care needs through a smartphone application. This feature allows for better lawn management and optimization of maintenance schedules.

In conclusion, the Husqvarna 960430173 is a powerful lawn mower that combines efficiency, comfort, and advanced technology. Its high-quality construction ensures durability, while its user-friendly features make lawn care a breeze. Whether for residential use or semi-professional applications, this mower delivers exceptional performance, making it a valuable tool for any lawn enthusiast.
Top Page Image Contents