Husqvarna 961430096 warranty Table of Contents

Page 3

Never operate machine in wet grass. Always be sure of your footing: keep a firm hold on the handle; walk, never run.

Disengage the drive system, if so equipped, before starting the engine (motor).

If the equipment should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

Always wear eye protection when operating machine.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

When loading or unloading this machine, do not exceed the maximum recommended operation angle of 15°.

Wear proper Personal Protective Equipment (PPE) while operating this machine, including (at a minimum) sturdy footwear, eye protection, and hearing protection. Do not mow in shorts or open toed footwear.

Always let someone know you are outside mowing.

III. SLOPE OPERATION

Slopes are a major factor related to slip & fall accidents, which can result in severe injury. All slopes require extra caution. If you feel uneasy on a slope, do not mow it.

DO:

Mow across the face of slopes: never up and down. Exercise extreme caution when changing direction on slopes.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts, bumps or hidden objects. Uneven terrain could cause a slip and fall accident. Tall grass can hide obstacles.

DO NOT:

Do not mow near drop-offs, ditches or embankments. You could lose your footing or balance.

Do not mow on wet grass or excessively steep slopes. Poor footing could cause a slip and fall accident.

IV. SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Use only an approved container.

Never remove gas cap or add fuel with the engine running.

Allow engine to cool before refueling.

Never refuel the machine indoors.

Never store the machine or fuel container where there is an open flame, spark or pilot light such as a water heater or on other appliances.

Never fill containers inside a vehicle, on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

If fuel is spilled on clothing, change clothing immediately.

Never overfill fuel tank. Replace gas cap and tighten securely.

V. GENERAL SERVICE

Never run a machine inside a closed area.

Never make adjustments or repairs with the engine (motor) running. Disconnect the spark plug wire, and keep the wire away from the plug to prevent accidental starting.

Keep all nuts and bolts tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly. Never do anything to interfere with the intended function of a safety device or reduce the protection provided by a safety device.

Keep machine free of grass, leaves, or other debris build-up. Clean oil or fuel spillage. Allow machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never attempt to make wheel height adjustments while the engine is running.

Grass catcher components are subject to wear, dam- age, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recom- mended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Do not change the engine governor setting or overspeed the engine.

Maintain or replace safety and instruction labels, as necessary.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

4

CUSTOMER RESPONSIBILITIES

4

ASSEMBLY

4-5

OPERATION

6-10

MAINTENANCE SCHEDULE

11

MAINTENANCE

11-14

SERVICE AND ADJUSTMENTS

15-16

STORAGE

16-17

TROUBLESHOOTING

18

WARRANTY

19-22

3

Image 3
Contents Operator’s Manual Manual de Operario Safety Rules ChildrenII. General Operation Table of Contents Customer Responsibilities AssemblyProduct Specifications HOW to SET UP Your Lawn MowerTighten T-knob Install Starter Rope See FigTo Install Attachments To Assemble Grass Catcher See FigMeets Cpsc Safety Requirements OperationKnow Your Lawn Mower HOW to USE Your Lawn Mower Engine SpeedEngine Zone Control To Convert Mower Simple Steps to Remember When Converting Your Lawn MowerBefore Starting Engine To Stop EngineTo Start Engine Mulching Mowing Tips Mowing TipsBefore Each USE MaintenanceLubrication Chart General RecommendationsBlade Care Lawn MowerTires Drive WheelsTo Change Engine OIL See Fig EngineGrass Catcher Gear CaseMuffler CleaningClean Under Drive Cover Water Washout Feature See FigTo Remove Drive Belt See Figs Service and AdjustmentsTo Adjust Cutting Height Rear DeflectorHandle See Figs To Adjust Handle See FigStorage CarburetorCylinder OtherFuel System Engine OILProblem Cause Correction Troubleshooting PointsConsumer Wheeled Products Limited Warranty HOW to Obtain Service Consumer Wheeled Limited Warranty Chart Consumer Wheeled Limited Warranty Chart Reglas DE Seguridad NiñosII. Operacion Servicio Tabla DE MateriasIII. Operacion Sobre LAS Cuestas IV. Manejo Seguro DE GasolinaComo Preparar SU Segadora Montaje / PRE-OPERACIÓNEspecificaciones DEL Producto Responsabilidades DEL ClientePara Montar EL Recogedor DE Césped Vea Fig Instalación DEL Cordón Arrancador Vea FigPara Instalar LOS Accesorios Operación Familiarícese CON SU SegadoraCumple CON LOS Requisitos DE Seguridad DE LA Cpsc Como Usar SU Segadora Velocidad DEL MotorControl DE Zona DEL Motor Pasos Simples DE Recordar Cuando Convierta SU Segadora Para Convertir LA SegadoraAntes DE Hacer Arrancar EL Motor Para Parar EL MotorPara Hacer Arrancar EL Motor Consejos Para Segar Y Acolchar Consejos Para SegarLubricación MantenimientoRecomendaciones Generales Antes DE Cada USOCuidado DE LA Cuchilla SegadoraLlantas Ruedas DE ImpulsiónPara Cambiar EL Aceite DEL Motor Vea Fig MotorRecogedor DE Césped Caja DE EngranajesLimpie Debajo DE LA Cubierta DE LA Impulsión LimpiezaSilenciador BujíaPara Remover Correa DE Impulsión Vea Figs y Servicio Y AjustesPara Ajustar LA Altura DE Corte Desviador TraseroMango Vea Figs y AlmacenamientoPara Ajustar EL Mango Vea Fig CarburadorCilindro OtrosSistema DE Combustible Aceite DEL MotorProblema Causa Corrección Solución DE ProblemasProductos con ruedas para consumidor Garantía limitada Cómo Obtener Servicio 575 49 43-01 W 2012 IR Consumidor Comercial Alquiler 02/28/2014 by

961430096 specifications

The Husqvarna 961430096, also known as the Husqvarna 562 XP, is a high-performance chainsaw designed for professionals and serious enthusiasts. Renowned for its exceptional power-to-weight ratio, this model is ideal for demanding tasks, including felling, limbing, and bucking trees of various sizes.

One of the standout features of the Husqvarna 562 XP is its X-Torq engine technology. This innovative engine reduces fuel consumption by up to 20%, contributing to lower emissions without sacrificing power. The chainsaw delivers impressive cutting performance with its 60.3 cc engine, achieving a maximum power output of 3.5 kW. This efficiency not only translates to prolonged usage without frequent refueling but also promotes a cleaner working environment.

In terms of design, the Husqvarna 961430096 incorporates an ergonomic handle, providing superior comfort and balance during operation. The saw’s lightweight structure aids maneuverability, essential for precision cutting in various conditions. Additionally, the rear handle features rubber inserts for improved grip and reduced vibrations, enabling extended use without causing fatigue.

The Husqvarna 562 XP also incorporates advanced air injection technology, which helps filter out larger particles from the air intake before they reach the air filter. This results in less frequent air filter maintenance, thereby enhancing the chainsaw’s productivity and longevity. Coupled with the easy-access fuel and oil caps, which allow for quick refueling, this model is designed to keep users focused on the task at hand rather than maintenance.

Another key feature is the LowVib system, which minimizes vibrations felt by the user. This ensures a more comfortable working experience, especially during prolonged jobs, reducing the likelihood of operator fatigue and injury.

Safety is also prioritized in the Husqvarna 961430096, as it includes a chain brake and an inertia-activated kickback brake, which provide an essential safeguard against accidents. A see-through fuel tank lets users easily monitor fuel levels, preventing unexpected run-outs during use.

Overall, the Husqvarna 961430096 combines power, efficiency, and user-friendly features, making it an excellent choice for those needing a reliable chainsaw capable of tackling tough jobs with ease. Its blend of advanced technologies ensures both performance and sustainability in demanding working conditions. Whether you are a professional logger or a dedicated landowner, this chainsaw stands out as a formidable tool in the domain of outdoor power equipment.