HOW to USE Your Lawn Mower, Engine Speed

OPERATION

The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or per- forming any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGINE SPEED

The engine speed was set at the factory for optimum per- formance. Speed is not adjustable.

3.Operate mower to test drive speed. Readjust as re- quired.

4.If condition fails to improve after the above steps (for- ward speed remains the same), your drive belt is worn and should be replaced.

ENGINE ZONE CONTROL

CAUTION: Federal regulations require an engine control to be installed on this lawn mower in order to minimize the risk of blade contact injury. Do not under any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

•Your lawn mower is equipped with an operator presence control bar which requires the operator to be positioned behind the mower handle to start and operate the mower.

ADJUSTMENT TURNBUCKLE

FIG. 5

DRIVE CONTROL (See Fig. 4)

•Self-propelling is controlled by holding the operator presence control bar down to the handle and pulling either drive control lever rearward to the handle. The further toward the handle a lever is pulled, the faster the unit will travel.

•Forward motion will stop when either the operator pres- ence control bar or a drive control lever are released. To stop forward motion without stopping engine, release a drive control lever only. Hold operator presence control bar down against handle to continue mowing without self-propelling.

NOTE: If after releasing the drive control the mower will not roll backwards, push the mower forward slightly to disengage drive wheels.

OPERATOR PRESENCE CONTROL BAR
	DRIVE
	CONTROL
	LEVERS
TO ENGAGE	DRIVE CONTROL
DRIVE CONTROL	DISENGAGED

FIG. 4

DRIVE CONTROL ADJUSTMENT (See Fig. 5)

Over time, the drive control system may become “loose”, resulting in decreased speed. There is a turnbuckle on the drive control housing to increase tension on the drive cable. Proceed as follows:

1.Turn unit off, disconnect spark plug wire from plug.

2.Rotate turnbuckle on drive control to increase drive speed.

TO ADJUST CUTTING HEIGHT (See Fig. 6)

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit your requirements. Medium position is best for most lawns.

•To change cutting height, pull up on adjuster lever, move wheel up or down to suit your requirements and release adjuster lever. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when lever inserts into hole in plate.

LEVER BACKWARD

TO LOWER MOWER

	LEVER	LEVER
	LEVER	FORWARD
		FORWARD
		TO RAISE
	PLATE	MOWER
	PLATE

FIG. 6

TO CONVERT MOWER

Your lawn mower was shipped ready to be used as a mulcher. To convert to bagging or discharging:

REAR BAGGING (See Fig. 7)

•Lift rear door of the lawn mower and place the grass catcher frame hooks onto the grass bag brackets.

•To convert to mulching or discharging operation, remove

6grass catcher and close rear door.

961450011 specifications

The Husqvarna 961450011 is a highly versatile and dependable lawn mower designed for homeowners who seek to maintain a pristine lawn with ease and efficiency. This model features a durable and efficient engine, ensuring a powerful performance capable of handling various types of grass and terrain. One of its main features is the robust 17 HP Briggs & Stratton engine, which provides ample power for cutting through thick and dense grass, while also ensuring fuel efficiency.

Equipped with a 42-inch cutting deck, the Husqvarna 961450011 allows for wider cutting paths, meaning larger areas can be mowed in less time compared to traditional push mowers. The cutting deck is designed with a clever design for optimal grass dispersion, preventing clumping and ensuring a neat finish. This deck is also adjustable, offering multiple cutting heights to cater to different grass types and personal preferences. Whether you prefer a close trim or a slightly higher cut, this mower can adapt to your needs.

Another noteworthy technology incorporated into this model is the hydrostatic transmission, which allows for smooth and precise speed adjustments. This feature enhances the operator's control, making it easier to maneuver around obstacles and navigate tight spaces. Additionally, the steering wheel control offers a comfortable grip and promotes easy handling, further reducing operator fatigue during longer mowing sessions.

Safety is a priority with the Husqvarna 961450011. It comes with a safety switch that ensures the engine cuts off when the operator leaves the seat, minimizing the risk of accidents. The design also includes an innovative reverse mowing feature, enabling grass cutting while moving backward, which adds convenience, especially in complex yard layouts.

Moreover, the mower boasts an ergonomic design, featuring a comfortable seat and user-friendly controls, allowing any operator, regardless of experience, to effectively manage their mowing tasks. The durability of the construction ensures that users will enjoy years of reliable service, while the sleek design encapsulates both form and function.

In summary, the Husqvarna 961450011 is a reliable, feature-rich lawn mower. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and emphasis on safety make it an excellent choice for homeowners looking to maintain their lawns seamlessly and effectively.