CONGRATULATIONS on your purchase of a new lawn mower. It has been designed, engineered and manufactured to give you the best possible dependability and performance.
Should you experience any problem you cannot easily rem- edy, please contact your nearest authorized service center/ department. We have competent,
Please read and retain this manual. The instructions will enable you to assemble and maintain your lawn mower properly. Always observe the “SAFETY RULES”.
SERIAL
NUMBER: _________________________________
DATE OF PURCHASE: _______________________
THE MODELAND SERIAL NUMBERS WILL BE FOUND ON ADECALATTACHED TO THE REAR OF THE LAWN MOWER HOUSING.
YOU SHOULD RECORD BOTH SERIAL NUMBERAND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
PRODUCT SPECIFICATIONS
Gasoline Capacity | 1.0 Quarts |
and Type: | (Unleaded Regular Only) |
|
|
Oil Type (API | SAE 30 (above 0°C / 32°F) |
| SAE |
|
|
Oil Capacity: | 0.58 Quarts |
|
|
Spark Plug: | NGK BPR5ES (Gap: .030") |
|
|
Valve Clearance: | Intake: 0.006 mm |
(± 0.001") | Exhaust: 0.008 mm |
|
|
Blade Bolt Torque: | |
|
|
CUSTOMER RESPONSIBILITIES
•Read and observe the safety rules.
•Follow a regular schedule in maintaining, caring for and using your lawn mower.
•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.
ASSEMBLY
Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower.
IMPORTANT: THIS LAWN MOWER IS SHIPPED WITH- OUT OIL OR GASOLINE IN THE ENGINE.
Your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for ship- ping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
TO REMOVE LAWN MOWER FROM CARTON
1.Remove loose parts included with mower.
2.Cut down two end corners of carton and lay end panel down flat.
3.Remove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle.
4.Roll lawn mower out of carton and check carton thor- ougly for additional loose parts.
HOW TO SET UP YOUR LAWN MOWER
TO UNFOLD HANDLE (See Figs. 1 and 2)
IMPORTANT: UNFOLD HANDLE CAREFULLY SO AS NOT TO PINCH OR DAMAGE CONTROL CABLES.
1.Raise lower handle section to operating position and align holes in lower handle with holes in handle brackets.
2.Insert handle bolts through lower handles and handle brackets; secure with lower (“standard”) knobs.
3.Remove protective padding, raise upper handle sec- tion into place on lower handle and tighten both upper (“star”) knobs.
4.Remove any packing material from around control bar.
Your handles may be adjusted for your mowing comfort. Refer to “ADJUST HANDLE” in the Service andAdjustments section of this manual.
OPERATOR | MOWING |
PRESENCE | POSITION |
CONTROL |
|
BAR |
|
| LIFT |
| UP |
LIFT |
|
UP | UPPER |
| HANDLE |
| UPPER |
| HANDLE |
| “STAR” |
| KNOB |
| LOWER |
| HANDLE |
| LOWER HANDLE |
| “STANDARD” KNOB |
FIG. 1
4