Husqvarna 385XP, 390XP manual What is WHAT?, What is what on the chain saw?

Page 5

WHAT IS WHAT?

What is what on the chain saw?

1	Cylinder cover	16	Bumper spike
2	Front handle	17	Chain catcher
3	Chain brake and front hand guard	18	Clutch cover
4	Starter	19	Rear handle with right hand guard
5	Chain oil tank	20	Throttle control
6	Starter handle	21	Throttle lock
7	Adjuster screws carburetor	22	Decompression valve
8	Choke control/Start throttle lock	23	Combination spanner
9	Rear handle	24	Chain tensioning screw
10	Stop switch (Ignition on/off switch.)	25	Operator’s manual (EPA)
11	Fuel tank	26	Bar guard
12	Mufﬂer	27	Switch for heated handle (385XPG, 390XPG)
13	Bar tip sprocket	28	Oil pump adjustment screw
14	Chain	29	Information and warning decal
15	Bar	30	Product and serial number plate

English – 5

Image 5

Contents 385XP 390XP Symbols on the machine KEY to SymbolsSymbols in the operator’s manual You will ﬁnd the following labels on your chain sawContents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Right hand guard Throttle lockChain catcher Cutting equipment Stop switchVibration damping system MufﬂerCutting equipment designed to reduce kickback General rulesBar ChainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingSharpening cutting teeth Instructions considerably increases the risk of kickbackAdjustment of depth gauge setting General advice on adjusting depth gauge settingIf the depth gauge setting is too large Tensioning the chainChain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication Fitting the bar and chain AssemblyFuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsGeneral rules Terms Basic cutting techniqueGeneral Cutting LimbingSafe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreatFelling cut FellingDirectional cuts Freeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionCutting the trunk into logs How to avoid kickbackWhat is kickback? General MaintenanceCarburetor adjustment High speed jet H Correctly adjusted carburetorChecking brake band wear Checking the front hand guardChecking the brake trigger Changing a broken or worn starter cord MufﬂerStarter Tensioning the recoil spring Air ﬁlterChanging a broken recoil spring Fitting the starterWhen making adjustments Adjustment of the oil pumpSpark plug Lubricating the bar tip sprocketCooling system Air Injection centrifugal cleaningWinter use Heated handlesDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical Data058/1,5 mm Saw chain ﬁling and ﬁle gauges050/1,3 mm Your Warranty Rights and Obligations Federal Emission Control Warranty StatementSafety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautionsPage ´z+R1=¶5¨ Page 1150172-95 ´z+R1=¶5¨ ´z+R1=¶5¨