Husqvarna PZ6030CV, 966062201, 966061401, 966060901, 966061201, 966061101, PZ7234FX, PZ6029PFX Running

OPERATION

Running

1.Release the parking brake by moving the lever downward.

NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake will shut off the engine.

2.Move the steering controls to the neutral position (N).

3.The cutting height can be set from 1"- 5"

(2.5 cm-12.7 cm) by setting the cutting height pin into the desired hole. Release deck height control by applying equal pressure to both pedals.

Push foot pedal fully forward for transport position. Set pin at desired cutting height. (Pin is removed by rotating 180O.) Push pedals again to lower deck to selected setting.

8065-006

Release the parking brake

8065-017

Cut height selection pedals

8065-016

Set deck to selected cutting height

35