Marantz SR5600 manual CH Input Level, Speakers Level Setting Without Test Tone, Main Room Status

LEVEL (VOLUME LEVEL):

Adjust the Multi-speaker output level with or cursor button.

Note:

•This setting can be changed when the Surr Back is set “NONE” in 2-1 SPEAKER SIZE menu. When this setting is unavailable, “✽✽✽” is displayed

MAIN ROOM STATUS:

Selected input source in the main room will be displayed.

Note:

•If “VOLUME” is set to “FIXED”, the multi-room output level cannot be adjusted from the second zone.

After you complete this portion of the set up, move the cursor to “MAIN” with or cursor buttons and press ENTER button.

8 7.1 CH INPUT LEVEL

This sub-menu is to adjust the speaker levels for 7.1-channel input sources.

Here you will adjust the volume for each channel so that they are all heard by the listener at the same level.

	8 7 . 1 CH I N P U T L E V E L
	V I D EO I N		:	L A S T
	F RON T	L	:	0	d B
	C E N T ER		:	0	d B
	F RON T	R	:	0	d B
	S URR . R		:	0	d B
	S URR . B	R	:	0	d B
	S URR . B	L	:	0	d B
	S URR . L		:	0	d B
	S UB W		:	0	d B
	MA I N				E X I T
1. Select “7.1CH INPUT” in the SETUP MAIN
MENU with the			or cursor buttons, and
press the ENTER button.
2. To select “VIDEO IN”, press					or cursor
button.
3. Using the		or	cursor buttons, select the

video input source which is emitted from Monitor out in the 7.1 CH INPUT function. The input source is switched by pressing the

or cursor buttons as follows;

LAST ↔ TV ↔ DVD ↔ VCR1 ↔ DSS ↔ AUX1 ↔ V-OFF ↔ LAST ↔

Notes:

•When select LAST, the source is set previous source before 7.1 CH INPUT function is activated.

•When select V-OFF, no signal is emitted from monitor out terminal.

4.	To Select desired channel , press the	or
5.	cursor buttons.
	Using the or cursor buttons, adjust the
6.	volume level of each channel.
	After you complete this portion of the set up,
	move the cursor to “MAIN” with the	or

cursor buttons and press the ENTER button.

Notes:

•These settings will be memorized to 7.1CH INPUT source.

•This feature can be directly selected with the CH.SEL button of the remote controller.

9SPEAKERS LEVEL SETTING WITHOUT TEST TONE

Channel level (speaker level) can be adjusted without using test tone.

Note:

•Four channel level settings can be memorized for reproduction: the 7.1 ch input mode, CS mode, Multi channel stereo mode, and all other surround modes, respectively.

C H L E V E L AD J US T
F RON T	L	:	0	d B
C EN T ER		:	0	d B
F RON T	R	:	0	d B
S URR . R		:	0	d B
S URR . B	R	:	0	d B
S URR . B	L	:	0	d B
S URR . L		:	0	d B
S UB W		:	0	d B

1.	Set the surround mode or 7.1 ch input mode
	which you want to adjust the channel level.
2.	Press the CH.SEL button on the remote.
3.	Select the desired channel (speaker) with the
	or cursor buttons.
4.	Adjust the level with the or cursor buttons.
5.	After completing the setup, press the CH.SEL
	button again.

ENGLISH

21