Marantz SR5600 manual Preference, Speakers Distance

Page 22

2-2 SPEAKERS DISTANCE

Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances.

Begin by determining the ideal or most commonly used seating position in the room.

This is important for the timing of the acoustics to create the proper sound space that the SR5600 and today’s sound systems are able to produce.

Note:

•For speakers that you have selected “NONE” the Speaker Configuration sub-menu will not appear here. (There are several useful books and special DVD and LD’s available to guide you through proper home theater configuration. If you are unsure, have your Marantz dealer perform the

i n s t a l l a t i o n f o r y o u . T h e y a r e t r a i n e d professionals familiar with even the most sophisticated custom installations. Marantz recommends the WWW.CEDIA.ORG website for further information about this).

2 - 2 S P E AK E R S

D I S T ANC E

 

F RON T

L

:

1 0

f t

3 . 0

m

F RON T

R

:

1 0

f t

3 . 0

m

C E N T ER

 

: 1 0 f t

3 . 0 m

S URR . L

 

:

1 0

f t

3 . 0

m

S URR . R

 

:

1 0

f t

3 . 0

m

S UB W

 

: 1 0 f t

3 . 0 m

S URR . B

L

:

1 0

f t

3 . 0

m

S URR . B

R

:

1 0

f t

3 . 0

m

MA I N R E T URN N E X T E X I T

1. To select each speaker , press the or cursor buttons.

2. To set the distance for each speaker , press

theorcursor buttons.

3. After you complete this portion of the set up, move the cursor to “NEXT” with the or cursor buttons and then press the ENTER button to go to the next page.

FRONT L:

Set the distance from the front left speaker to your normal listening position.

Center:

Set the distance from the center speaker to your normal listening position.

FRONT R:

Set the distance from the front right speaker to your normal listening position.

SURR. L:

Set the distance from the surround left speaker to your normal listening position.

SURR. R:

Set the distance from the surround right speaker to your normal listening position.

SUB W:

Set the distance from the subwoofer to your normal listening position.

SURR. B L:

Set the distance from the surround back left speaker to your normal listening position.

SURR. B R:

Set the distance from the surround back right speaker to your normal listening position.

Notes:

•Set the distance to each speaker in meters (m) or feet (ft) as follows.

m:0.3 - 9 m in 0.3 m steps ft: 1 - 30 ft in 1 ft steps

•For the speakers that you have selected “NONE” the Speaker Size menu will not appear.

•The setting for Surr.Back L and Surr.Back R appears if you set for it to, two surround back speakers in the Speaker Size menu.

•The setting of Surr.Back appears if it is set for one surround back speaker in the Speaker Size menu.

2-3 SPEAKERS LEVEL SETTING WITH TEST TONE

Here you will set the volume for each speaker so that they are all heard by the listener at the same level. We recommend using a SPL (Sound Pressure Level) meter, when available.

Note:

•The speaker level settings are not available in 7.1 Channel Input mode, CS mode and Multi Channel Stereo mode.

2 - 3 S P E AK E R S L E V E L

 

T E S T MOD E

:

MANUA L

F RON T

L

:

0

d B

C E N T ER

 

:

0

d B

F RON T

R

:

0

d B

S URR . R

 

:

0

d B

S URR . B

R

:

0

d B

S URR . B

L

:

0

d B

S URR . L

 

:

0

d B

S UB W

 

:

0

d B

MA I N R E T URN

 

 

E X I T

 

 

 

 

 

TEST MODE :

Selects “MANUAL” or “AUTO” for generating the mode of the test tone with theorcursor buttons.

If you select “AUTO” , the test tone will be cycled through in a circular pattern which is Left →Center

→Right → Surround Right → Surround Back Right

→Surround Back Left → Surround Left → Subwoofer → Left →.. increments of 2 seconds for each channel.

Using theorcursor buttons, adjust the volume level of the noise from the speaker so that it is the same level for all the speakers.

If you select “MANUAL”, adjust the output level of each speaker as listed below.

1. When you move the cursor to FRONT L by pressing thecursor button, the SR5600 will emit a pink noise from the front left speaker.

Remember the level of this noise and then press thecursor button.

(Note that this can be adjusted to any level between -10 and +10 dB in 1 dB intervals except the subwoofer setting. The subwoofer can be adjusted to any level between -15 and +10 dB in 1 dB intervals.)

The SR5600 will now emit the pink noise from the center speaker.

2. Using theand cursor buttons, adjust the volume level of the noise from the center speaker so that it is the same level as the front left speaker.

3. Press thecursor button again. The SR5600 will now emit the pink noise from the front right speaker.

4. Repeat steps 2 and 3 above for the front right and other speakers until all speakers are adjusted to the same volume level.

After you complete this portion of the set up, press the ENTER button, the cursor will move to “MAIN” and then press the ENTER button to go to SETUP MAIN MENU.

Notes:

•Speakers that you selected “NONE” for in the Speaker Size menu will not appear.

•The setting of Surr.Back L and Surr.Back R appears if you have set it for two surround back speakers in the Speaker Size menu.

•The setting of Surr.Back appears if you have set it for one surround back speaker in the Speaker Size menu.

•To adjust the speaker levels for 7.1-channel input sources, you will need to use the 7.1CH-INPUT sub menu. (See page 21).

3 PREFERENCE

 

3 P R E F E R E NC E

 

 

 

S T ANDB Y MOD E

:

E CONOMY

 

 

T V - AU T O

:

✽ ✽ ✽

 

 

OS D I N F O

:

E NAB L E

 

 

V I D EO CON V E R T

:

E NAB L E

 

 

MA I N

 

E X I T

 

1.

 

MAIN

Select “PREFERENCE” in the SETUP

MENU with the or

cursor buttons, and

press the ENTER button.

 

 

2. To select a desired content, press the or cursor buttons.

STANDBY MODE:

When this function is set to “ECONOMY”, you can reduce the power consumption when the unit is in the standby mode.

Note:

•TV-AUTO and RS-232C are disabled in the “ECONOMY” setting.

TV AUTO:

Select the TV AUTO ON/OFF function to enable or disable with the or cursor buttons. (refer to page 27)

OSD Info:

Select the OSD information function to enable or disable with the or cursor buttons.

If you select “ENABLE”, the SR5600 will display the status of the feature (Volume up/down, input select, etc..) on the TV monitor. But if you do not desire this information, select “DISABLE ”.

VIDEO CONVERT:

Select the VIDEO CONVERT function to enable or disable with the or cursor buttons. (Video cable connection: Refer to page 23)

After you complete this portion of the set up, move the cursor to “MAIN” with the or cursor buttons and press the ENTER button.

ENGLISH

19

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Model SR5600 User Guide Read Before Operating Equipment Lightning and power-line surges Power-Cord Protection Power-supply cordsProduct during a lightning storm, or when it is Power Lines An outside antenna systemTable of Contents Introduction PrecautionsDescription About Dolby Pro LogicRemote Controller RC5500SR FeaturesAccessories AC Power Cord User GuideFront Panel FL Display Rear Panel Audio IN/OUT CD, TAPE, CD-R, TV, DVD, VCR1, DSS/VCR2Remote Control Operation Function and OperationProgramming the Remote Controller Operation of Remote Control Unit General Information of RC5500SR to SR5600Contrable Function Table Connecting Speaker Wire Speaker PlacementConnecting Speakers ConnectionsConnecting Digital Audio Components Connecting a SubwooferTo prevent damage to circuitry, do not let the bare There are 3 types of video jacks on the rear panel Connecting Video ComponentsVIDEO, S-VIDEO , Component Jacks Video jackConnecting Multi Channel Audio Source Connecting AN External Power AmplifierConnecting AN FM Outdoor Antenna Connecting the Antenna TerminalsConnecting the Supplied Antennas Connecting AN AM Outdoor AntennaConnecting for the Multi Room MultiroomSetup On Screen Display Menu SystemInput and Component Video Input Speaker SetupInput Setup Assignable Digital Speakers SizePreference Speakers DistanceCS II Circle Surround II Parameter SurroundPL II PRO Logic II Music Parameter Multi RoomCH Input Level Speakers Level Setting Without Test ToneSelect 7.1CH Input in the Setup Main Main Room StatusRelation of the speakers number and conectted speaker Simple SetupRelation of the room size and floor space Basic Operation Night Mode Surround ModeUsing the Sleep Timer AutoCircle Surround CSII-CINEMA, CSII-MUSIC, CSII-MONO EX/ESMulti CH. ST VirtualMode and the input signal Relation between the selected surroundOther Function CH Input CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the record modeRecording AN Analog Source HT-EQLIP.SYNC AUX2 InputListening to the Tuner Recalling a Preset Station Preset MemoryAuto Preset Memory Preset ScanName Input of the Preset Station Clearing Stored Preset StationsSorting Preset Stations ← DownPress the M. Speaker B button. The unit Multi Room SystemMulti Room Speaker On/ Off is available in main room only Troubleshooting Symptom Cause RemedyDimensions TechnicalSetup Codes 0081, 0057, 1481, 0733 Harman/Kardon0074, 0081, 0181, 0183 0120, 0177, 1277, 0205Iii Europe

SR5600 specifications

The Marantz SR5600 is a powerful and versatile AV receiver that delivers an exceptional home theater experience for audio and video enthusiasts alike. Known for its high fidelity audio performance and robust feature set, the SR5600 is designed to enhance your entertainment space, making it an excellent choice for both casual viewers and dedicated audiophiles.

One of the standout features of the Marantz SR5600 is its 7.1-channel sound capability. With a total power output of 110 watts per channel, it provides enough oomph to fill larger rooms with dynamic sound. The receiver supports multiple audio formats, including Dolby Digital, Dolby Pro Logic II, and DTS, ensuring that you experience movies, music, and games in their full sonic glory. The onboard DSP (Digital Signal Processing) features various sound modes, allowing listeners to customize their audio experience according to their preferences and the nature of the content being played.

In terms of connectivity, the SR5600 includes an impressive array of inputs and outputs. It features multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, game consoles, and streaming devices with ease. Additionally, the receiver is equipped with component and composite video inputs, along with digital optical and coaxial connections, providing flexibility for integrating legacy devices.

The Marantz SR5600 also incorporates advanced video upscaling technology, ensuring that standard-definition video can be enhanced to near-HD quality. This feature is particularly beneficial for those who enjoy watching older movies or TV shows, as it helps improve picture clarity and detail when viewed on modern displays.

Moreover, the SR5600 features the renowned Marantz audio philosophy, emphasizing high-quality components and exceptional build quality. This attention to detail extends to the receiver's aesthetics, showcasing a sleek design that complements any home entertainment setup.

One of the highlights of the Marantz SR5600 is the user-friendly interface and remote control, making it straightforward to navigate settings and preferences. Additionally, the receiver supports various room correction technologies, which help to optimize audio output based on the room's acoustics, ensuring that you get the best possible sound in your specific environment.

In summary, the Marantz SR5600 is a well-rounded AV receiver that combines advanced technology with high-quality audio performance. Its extensive connectivity options, powerful sound capabilities, and user-friendly design make it an excellent choice for anyone looking to elevate their home entertainment system. Whether you're hosting movie nights or enjoying your favorite music, the SR5600 promises an immersive and engaging experience.
Top Page Image Contents