Husqvarna WH3616 / 966638601, WH5218 / 966638603 Running, Reverse, Tracking, Operating on Hills

Page 23

operation

Running

Depress one operator presence lever and move the speed control to the desired speed. Pull the blade engagement control upwards. Set the desired rpm with the throttle. The best cutting and bagging is obtained with engine at top rpm.

While on level terrain, squeeze both drive levers slightly. Using thumbs, slide each neutral lock out the locked position. Slowly release both drive levers at the same time to begin forward motion.

The steering system of this mower uses individual right and left drive levers on the handle bars. Squeezing either lever will reduce the speed to that wheel. With the opposite wheel still under power, a turn is accomplished.

If the drive lever is squeezed even tighter the wheel will go into reverse and a tighter more abrupt turn is accomplished. Turn left by squeezing the left hand lever or turn right by squeezing the right hand lever.

Reverse

The mower moves to the reverse gear when both drive levers are pulled fully upward to the handles.

Tracking

If the mower is not tracking straight, check the air pressure in both rear tires. Recommended air pressure is 15 psi (1 bar). Tracking should be checked on a flat, level surface.

See Tracking Adjustment in the Controls section.

8062-044

Operator presence lever - left hand

WARNING!

Be sure all persons are clear of area before engaging the blades.

8062-027

Tracking knob

Operating on Hills

Operating on slopes can be hazardous. Read the Safety section Driving on Slopes.

The slowest speed possible should be used when mowing on slopes.

Avoid stopping or changing speed on hills.

Make all turns slowly.

WARNING!

Never use the machine on terrain that slopes more than 10 degrees.

Mow slopes side to side, not up and down. Avoid sudden directional changes.

23

Image 23
Contents Operator Manual All rights reserved Contents Page Driving and Transport on Public Roads IntroductionCongratulations GeneralManufacturing Number Good ServiceSymbols and decals General Operation SafetySlope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Transport Control Locations ControlsDrive Levers Ignition SwitchRecoil Starter Grip Choke Control Operator Presence SwitchesGround Speed Control Neutral Lock Tracking AdjustmentThrottle Control Optional Service MeterParking Brake Blade Engagement ControlFuel Tank Fuel Shutoff ValveBefore Starting OperationStarting the Engine Speed control in the start position Operating on Hills RunningReverse TrackingMowing Tips Stopping the Engine StoppingEmergency Stop Normal operating stopShut OFF the fuel valve Cutting Height Table Cutting Height AdjustmentCutting Height Table It may be necessary to readjust drive and brake linkagesBefore After MaintenanceMaintenance Schedule Daily Maintenance interval Least Hours Once EachMaintenance Function Check Safety SystemReplacing belt Tire PressuresDeck Belt Cutting Blades Blade replacementWashing CleaningHardware Under side of rear deckGeneral Front Wheel Bearings LubricationFront Wheel Mount Problem Cause TroubleshootingTroubleshooting Winter Storage ServiceLower Harness Harness Adapter Upper Harness Technical Data WH5218 Engine HEX Head CAP Screws USA requirements CONForMITY CertificatesDelivery Service Service JournalAfter the first 8 hours Hour ServicePerform the 25-hour service At Least Once Each Year Service Journal Page 115 392127R1 09/14/10

WH3616 / 966638601, WH4818 / 966638602, WH5218 / 966638603 specifications

Husqvarna has established itself as a leader in outdoor power equipment, and their range of brushcutters is no exception. Among their most notable models are the WH5218, WH4818, and WH3616, each boasting impressive features, advanced technologies, and robust characteristics suited for various applications.

The Husqvarna WH5218 (966638603) stands out with its powerful 2-stroke engine, providing exceptional performance and fuel efficiency. This model is designed for heavy-duty tasks, making it ideal for professional landscapers and homeowners alike. Its ergonomic design ensures user comfort during prolonged use, while the adjustable handlebar allows for optimal control, enabling precision cutting in hard-to-reach areas. The vibration-dampening system enhances overall comfort, reducing fatigue and allowing users to tackle larger projects with ease.

Next in the lineup is the WH4818 (966638602), which balances power and versatility. This model features a robust engine that delivers reliable performance, making it suitable for both professional and amateur gardeners. The lightweight design makes it easy to maneuver, while the intuitive controls enhance user experience. The WH4818 also incorporates Husqvarna’s Smart Start technology, which facilitates easier starting with minimal effort. This brushcutter is equipped with a dual-line cutting system that provides exceptional cutting efficiency, allowing for neat and tidy trimming in various terrains.

The WH3616 (966638601) represents a more compact option without compromising on performance. Equipped with a user-friendly interface and a sturdy engine, this model is perfect for those seeking a reliable tool for residential use. Its lightweight chassis allows for easy portability, making it an excellent choice for homeowners set on maintaining their gardens. The WH3616 is designed with an auto-return stop switch, ensuring the engine is ready to start whenever the user is prepared to go to work.

All three Husqvarna models are engineered with durability in mind, featuring high-quality materials and construction to withstand harsh working conditions. With advanced features like anti-vibration systems, adjustable handles, and efficient cutting mechanisms, the WH5218, WH4818, and WH3616 deliver exceptional performance and comfort. Whether for professional landscaping or home maintenance, these brushcutters provide the perfect blend of power, ease of use, and reliability, making them indispensable tools in any outdoor toolkit. Husqvarna continues to set the standard for outdoor equipment, providing users with innovative solutions to meet their cutting needs.