MAINTENANCE
Adjusting the Mower Deck
WARNING!
Before performing any service or adjustment checklist:
1.Engage the parking brake.
2.Place the Blade switch in the disengaged position.
3.Turn ignition switch to “OFF” position and remove the key.
4.Make sure the blades and all moving parts have completely stopped.
5.Disconnect the spark plug wire from all spark plugs and place the wire where it cannot come in contact with the plug.
WARNING!
Blades are sharp. Protect your hands with gloves and/or wrap blades with a 
heavy cloth when handling.
Check the tire pressure before adjustment of the mower deck. See Checking Tire Pressure in Maintenance. Faulty mower deck adjustments will cause an uneven mowing result.
Leveling Deck
1.Position the mower on a level, preferably concrete, surface.
2.Check the pressure in all four tires. See Technical Data section.
3.Rotate blade to align side to side.
4.Turn front adjuster nut(s) to level deck side to side.
IMPORTANT INFORMATION
This procedure will place the mower in a standard measurement position. Additional adjustment may be required to achieve desired cut for the type of grass or conditions involved.
Side to side adjuster nut
39