Husqvarna 336 manual Cutting equipment designed to minimise kickback

Page 11

GENERAL SAFETY PRECAUTIONS

Cutting equipment designed to minimise kickback

WARNING! Faulty cutting equipment or the

!wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

The only way to avoid kickback is to make sure that the kickback zone of the bar never touches anything.

By using cutting equipment with ”built-in” kickback reduction and keeping the chain sharp and well-maintained you can reduce the effects of kickback.

Bar

The smaller the tip radius the smaller the kickback zone and the lower the chance of kickback.

Chain

A chain is made up of a number of links, which are available in standard and low-kickback versions.

IMPORTANT! No saw chain design eliminates the danger of kickback.

WARNING! Any contact with a rotating saw

!chain can cause extremely serious injuries.

Some terms that describe the bar and chain

To maintain the safety features of the cutting equipment, you should replace a worn or damaged bar or chain with a bar and chain combinations recommended by Husqvarna. See instructions under the heading Technical Data for a list of replacement bar and chain combinations we recommend.

Bar

•Length (inches/cm)

•Number of teeth on bar tip sprocket (T).

•Chain pitch (inches). The spacing between the drive links of the chain must match the spacing of the teeth on the bar tip sprocket and drive sprocket.

•Number of drive links. The number of drive links is determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

•Bar groove width (inches/mm). The groove in the bar must match the width of the chain drive links.

•Chain oil hole and hole for chain tensioner. The bar must be matched to the chain saw design.

Chain

•Chain pitch (inches)

•Drive link width (mm/inches)

•Number of drive links.

Sharpening your chain and adjusting depth gauge setting

General information on sharpening cutting teeth

•Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the cuttings will be very small. If the chain is very blunt it will not produce any cuttings at all. Wood powder would be the only result.

•A sharp chain eats its way through the wood and produces long, thick cuttings.

•The cutting part of the chain is called the cutting link and this consists of a cutting tooth (A) and the raker lip (B).The cutting depth is determined by the difference in height between the two.

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator’s manual 336 EPA Symbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Vibration damping system Throttle lockChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerCutting equipment designed to minimise kickback Sharpening your chain and adjusting depth gauge settingSharpening cutting teeth General advice on adjusting depth gauge settingAdjustment of depth gauge setting Filling with chain oil Tensioning the chainLubricating cutting equipment Chain oilChecking wear on cutting equipment Checking chain lubricationChain drive sprocket Needle bearing lubricationBar Fitting the bar and chain AssemblyFuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules Terms Basic cutting techniqueGeneral Cutting LimbingClearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling directionDirectional cuts FellingCutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a trapped treeCutting the trunk into logs How to avoid kickbackWhat is kickback? General MaintenanceCarburetor adjustment Checking the front hand guard Correctly adjusted carburetorHigh speed jet H Checking brake band wearChecking the brake trigger Changing a broken or worn starter cord MufflerStarter Fitting the starter Air filterTensioning the recoil spring Changing a broken recoil springCooling system Adjustment of the oil pumpSpark plug Lubricating the bar tip sprocketDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinations, modelYour Warranty Rights and Obligations Federal Emission Control Warranty StatementOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautions1150146-95 ´z+R.e¶5/¨ ´z+R.e¶5/¨
Related manuals
Manual 57 pages 161 b

336 specifications

The Husqvarna 336 is a powerful and reliable chainsaw designed for both professional forestry work and demanding garden tasks. This versatile tool is ideal for users who value durability, performance, and ease of use. The 336 model stands out in the Husqvarna range thanks to its innovative features and cutting-edge technology.

One of the main highlights of the Husqvarna 336 is its efficient engine. Powered by a 34.6 cc, 2.6 kW engine, it strikes a balance between power and weight, ensuring that users can handle it comfortably during extended use. The X-Torq engine technology reduces fuel consumption and emissions, making it an environmentally-friendly option, while still delivering high performance.

The design of the Husqvarna 336 is crafted for maximum user comfort. The chainsaw features an ergonomic handle that ensures a secure and balanced grip, reducing fatigue during long periods of operation. Additionally, the lightweight design enhances maneuverability, allowing users to navigate through tight spaces and tackle challenging cuts with ease.

Safety is paramount in the design of the Husqvarna 336. The chainsaw is equipped with a quick-release air filter system, which makes maintenance simple and efficient. The chain brake works effectively to prevent accidents, and the chainsaw is fitted with a low-vibration system that minimizes vibrations felt by the user, improving overall comfort and control.

Another notable feature of the Husqvarna 336 is its intuitive controls, which allow users to quickly adjust settings and make necessary changes on the job. The model boasts an adjustable oil pump that lets users optimize chain lubrication based on the task at hand. This means improved efficiency and extended chain life, ultimately saving users both time and money.

The chainsaw also incorporates an easy-start mechanism, reducing the effort required to start the engine. This makes the Husqvarna 336 a practical choice for users of all skill levels, from seasoned professionals to beginners looking to tackle their first projects.

In summary, the Husqvarna 336 is a standout chainsaw that combines power, comfort, and advanced technology. Its features, including the X-Torq engine, ergonomic design, safety elements, and ease of maintenance, make it an excellent investment for anyone serious about forestry work or outdoor upkeep. Whether pruning trees, cutting firewood, or felling small trees, the Husqvarna 336 excels in performance and reliability, ensuring users get the job done efficiently and effectively.
Top Page Image Contents