Husqvarna 336 General Safety Precautions, Before using a new chain saw, Always use common sense

Page 6

GENERAL SAFETY PRECAUTIONS

Before using a new chain saw

•Please read this manual carefully.

•Check that the cutting equipment is correctly fitted and adjusted. See instructions under the heading Assembly.

•Refuel and start the chain saw. See the instructions under the headings Fuel Handling and Starting and Stopping.

•Do not use the chain saw until sufficient chain oil has reached the chain. See instructions under the heading Lubricating cutting equipment.

•Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may the

!design of the machine be modified without the permission of the manufacturer. Always use genuine accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

WARNING! A chain saw is a dangerous tool

!if used carelessly or incorrectly and can cause serious, even fatal injuries. It is very important that you read and understand the contents of this operator’s manual.

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Long term inhalation of the

!engine’s exhaust fumes, chain oil mist and dust from sawdust can represent a health risk.

Important

IMPORTANT!

The machine is only designed for cutting wood.

You should only use the saw with the bar and chain combinations we recommend in the chapter Technical data.

Never use the machine if you are fatigued, while under the influence of alcohol or drugs, medication or anything that could affect your vision, alertness, coordination or judgement.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Do not modify this product or use it if it appears to have been modified by others.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

Never use any accessories other than those recommended in this manual. See instructions under the headings Cutting equipment and Technical data.

CAUTION! Always wear protective glasses or a face visor to reduce the risk of injury from thrown objects. A chain saw is capable of throwing objects, such as wood chips, small pieces of wood, etc, at great force. This can result in serious injury, especially to the eyes.

WARNING! Running an engine in a confined

!or badly ventilated area can result in death due to asphyxiation or carbon monoxide poisoning.

WARNING! Faulty cutting equipment or the

!wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combinations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

Always use common sense

It is not possible to cover every conceivable situation you can face when using a chain saw. Always exercise care and use your common sense. Avoid all situations which you consider to be beyond your capability. If you still feel uncertain about operating procedures after reading these instructions, you should consult an expert before continuing. Do not hesitate to contact your dealer or us if you have any questions about the use of the chain saw. We will willingly be of service and provide you with advice as well as help you to use your chain saw both efficiently and safely. Attend a training course in

6 – English

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Operator’s manual 336 EPA KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Introduction Dear customerWhat is WHAT? What is what on the chain saw?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Right hand guard Throttle lockChain catcher Vibration damping systemMuffler Stop switchCutting equipment General rulesSharpening your chain and adjusting depth gauge setting Cutting equipment designed to minimise kickbackGeneral advice on adjusting depth gauge setting Adjustment of depth gauge settingSharpening cutting teeth Chain oil Tensioning the chainLubricating cutting equipment Filling with chain oilNeedle bearing lubrication Checking chain lubricationChain drive sprocket Checking wear on cutting equipmentBar Assembly Fitting the bar and chainFuel Handling FuelTransport and storage Fuel safetyFueling Long-term storageCold engine Starting and StoppingStarting and stopping Warm engineStopping Before use Basic safety rulesWorking Techniques General working instructionsGeneral rules Basic cutting technique GeneralTerms Limbing CuttingFelling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreatFelling Directional cutsFreeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral Checking brake band wear Correctly adjusted carburetorHigh speed jet H Checking the front hand guardChecking the brake trigger Muffler StarterChanging a broken or worn starter cord Changing a broken recoil spring Air filterTensioning the recoil spring Fitting the starterLubricating the bar tip sprocket Adjustment of the oil pumpSpark plug Cooling systemMaintenance schedule Daily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical dataBar and chain combinations, model Saw chain filing and file gaugesFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsKickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautions1150146-95 ´z+R.e¶5/¨ ´z+R.e¶5/¨
Related manuals
Manual 57 pages 161 b

336 specifications

The Husqvarna 336 is a powerful and reliable chainsaw designed for both professional forestry work and demanding garden tasks. This versatile tool is ideal for users who value durability, performance, and ease of use. The 336 model stands out in the Husqvarna range thanks to its innovative features and cutting-edge technology.

One of the main highlights of the Husqvarna 336 is its efficient engine. Powered by a 34.6 cc, 2.6 kW engine, it strikes a balance between power and weight, ensuring that users can handle it comfortably during extended use. The X-Torq engine technology reduces fuel consumption and emissions, making it an environmentally-friendly option, while still delivering high performance.

The design of the Husqvarna 336 is crafted for maximum user comfort. The chainsaw features an ergonomic handle that ensures a secure and balanced grip, reducing fatigue during long periods of operation. Additionally, the lightweight design enhances maneuverability, allowing users to navigate through tight spaces and tackle challenging cuts with ease.

Safety is paramount in the design of the Husqvarna 336. The chainsaw is equipped with a quick-release air filter system, which makes maintenance simple and efficient. The chain brake works effectively to prevent accidents, and the chainsaw is fitted with a low-vibration system that minimizes vibrations felt by the user, improving overall comfort and control.

Another notable feature of the Husqvarna 336 is its intuitive controls, which allow users to quickly adjust settings and make necessary changes on the job. The model boasts an adjustable oil pump that lets users optimize chain lubrication based on the task at hand. This means improved efficiency and extended chain life, ultimately saving users both time and money.

The chainsaw also incorporates an easy-start mechanism, reducing the effort required to start the engine. This makes the Husqvarna 336 a practical choice for users of all skill levels, from seasoned professionals to beginners looking to tackle their first projects.

In summary, the Husqvarna 336 is a standout chainsaw that combines power, comfort, and advanced technology. Its features, including the X-Torq engine, ergonomic design, safety elements, and ease of maintenance, make it an excellent investment for anyone serious about forestry work or outdoor upkeep. Whether pruning trees, cutting firewood, or felling small trees, the Husqvarna 336 excels in performance and reliability, ensuring users get the job done efficiently and effectively.
Top Page Image Contents