Husqvarna 336 manual Throttle lock, Chain catcher, Right hand guard, Vibration damping system

Page 9

GENERAL SAFETY PRECAUTIONS

Will my hand always activate the chain brake during a kickback?

No. It takes a certain force to move the hand guard forward. If your hand only lightly touches the front guard or slips over it, the force may not be enough to trigger the chain brake. You should also maintain a firm grip of the chain saw handles while working. If you do and experience a kickback, your hand may never leave the front handle and will not activate the chain brake, or the chain brake will only activate after the saw has swung around a considerable distance. In such instances, the chain brake might not have enough time to stop the saw chain before it touches you.

There are also certain positions in which your hand cannot reach the front hand guard to activate the chain brake; for example, when the saw chain is held in felling position.

Will my inetria activated chain brake always activate during kickback in the event of a kickback?

No. First your brake must be in working order. Testing the brake is simple, see instructions under the heading Checking, maintaining and servicing chain saw safety equipment. We recommend you do before you begin each work session. Second the kickback must be strong enough to activate the chain brake. If the chain brake is too sensitive it would activate all the time which would be a nuisance.

Will my chain brake always protect me from injury in the event of a kickback?

No. First, the chain brake must be in working order to provide the intended protection. Second, it must be activated during the kickback as described above to stop the saw chain. Third, the chain brake may be activated but if the bar is to close to you the brake might not have enough time to slow down and stop the chain before the chain saw hits you.

Only you and proper working technique can eliminate kickback and its danger.

Throttle lock

The throttle lock is designed to prevent accidental operation of the throttle control. When you press the lock (A) (i.e. when you grasp the handle) it releases the throttle control (B).When you release the handle the throttle control and the throttle lock both move back to their original positions. This arrangement means that the throttle control is automatically locked at the idle setting.

Chain catcher

The chain catcher is designed to catch the chain if it snaps or jumps off. This should not happen if the chain is properly tensioned (see instructions under the heading Assembly) and if the bar and chain are properly serviced and maintained (see instructions under the heading General working instructions).

Right hand guard

Apart from protecting your hand if the chain jumps or snaps, the right hand guard stops branches and twigs from interfering with your grip on the rear handle.

Vibration damping system

Your machine is equipped with a vibration damping system that is designed to reduce vibration and make operation easier.

The machines vibration damping system reduces the transfer of vibration between the engine unit/cutting equipment and the machines handle unit.

The body of the chain saw, including the cutting equipment, is insulated from the handles by vibration damping units.

English – 9

Image 9
Contents Operator’s manual 336 EPA KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Chain catcher Throttle lockRight hand guard Vibration damping systemCutting equipment Stop switchMuffler General rulesCutting equipment designed to minimise kickback Sharpening your chain and adjusting depth gauge settingGeneral advice on adjusting depth gauge setting Adjustment of depth gauge settingSharpening cutting teeth Lubricating cutting equipment Tensioning the chainChain oil Filling with chain oilChain drive sprocket Checking chain lubricationNeedle bearing lubrication Checking wear on cutting equipmentBar Fitting the bar and chain AssemblyFuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsGeneral rules Basic cutting technique GeneralTerms Cutting LimbingSafe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreatDirectional cuts FellingFreeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral High speed jet H Correctly adjusted carburetorChecking brake band wear Checking the front hand guardChecking the brake trigger Muffler StarterChanging a broken or worn starter cord Tensioning the recoil spring Air filterChanging a broken recoil spring Fitting the starterSpark plug Adjustment of the oil pumpLubricating the bar tip sprocket Cooling systemDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinations, modelYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSafety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautions1150146-95 ´z+R.e¶5/¨ ´z+R.e¶5/¨
Related manuals
Manual 57 pages 161 b

336 specifications

The Husqvarna 336 is a powerful and reliable chainsaw designed for both professional forestry work and demanding garden tasks. This versatile tool is ideal for users who value durability, performance, and ease of use. The 336 model stands out in the Husqvarna range thanks to its innovative features and cutting-edge technology.

One of the main highlights of the Husqvarna 336 is its efficient engine. Powered by a 34.6 cc, 2.6 kW engine, it strikes a balance between power and weight, ensuring that users can handle it comfortably during extended use. The X-Torq engine technology reduces fuel consumption and emissions, making it an environmentally-friendly option, while still delivering high performance.

The design of the Husqvarna 336 is crafted for maximum user comfort. The chainsaw features an ergonomic handle that ensures a secure and balanced grip, reducing fatigue during long periods of operation. Additionally, the lightweight design enhances maneuverability, allowing users to navigate through tight spaces and tackle challenging cuts with ease.

Safety is paramount in the design of the Husqvarna 336. The chainsaw is equipped with a quick-release air filter system, which makes maintenance simple and efficient. The chain brake works effectively to prevent accidents, and the chainsaw is fitted with a low-vibration system that minimizes vibrations felt by the user, improving overall comfort and control.

Another notable feature of the Husqvarna 336 is its intuitive controls, which allow users to quickly adjust settings and make necessary changes on the job. The model boasts an adjustable oil pump that lets users optimize chain lubrication based on the task at hand. This means improved efficiency and extended chain life, ultimately saving users both time and money.

The chainsaw also incorporates an easy-start mechanism, reducing the effort required to start the engine. This makes the Husqvarna 336 a practical choice for users of all skill levels, from seasoned professionals to beginners looking to tackle their first projects.

In summary, the Husqvarna 336 is a standout chainsaw that combines power, comfort, and advanced technology. Its features, including the X-Torq engine, ergonomic design, safety elements, and ease of maintenance, make it an excellent investment for anyone serious about forestry work or outdoor upkeep. Whether pruning trees, cutting firewood, or felling small trees, the Husqvarna 336 excels in performance and reliability, ensuring users get the job done efficiently and effectively.