Husqvarna 336 manual Air filter, Tensioning the recoil spring, Changing a broken recoil spring

Page 33

MAINTENANCE

Undo the screw in the centre of the pulley and remove the pulley. Insert and fasten a new starter cord to the pulley. Wind approx. 3 turns of the starter cord onto the pulley.

Connect the pulley to the recoil spring so that the end of the spring engages in the pulley. Fit the screw in the center of the pulley. Insert the starter cord through the hole in the starter housing and the starter handle. Make a secure knot in the end of the starter cord.

Tensioning the recoil spring

Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockwise.

Note! Check that the pulley can be turned an additional 1/ 2 turn when the starter cord is pulled all the way out.

Changing a broken recoil spring

Lift up the starter pulley. See instructions under the heading Changing a broken or worn starter cord. Remember that the recoil spring is coiled under tension in the starter housing.

Remove the cassette with the recoil spring from the starter.

Lubricate the recoil spring with light oil. Fit the cassette with recoil spring in the starter. Fit the starter pulley and tension the recoil spring.

Fitting the starter

To fit the starter, first pull out the starter cord and place the starter in position against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

Fit and tighten the screws that hold the starter.

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

Carburettor malfunctions

Starting problems

Loss of engine power

Unnecessary wear to engine parts

Excessive fuel consumption.

Remove the air filter after taking off the air filter cover. When refitting make sure that the air filter seals tightly against the filter holder. Clean the filter by brushing or shaking it.

The filter can be cleaned more thoroughly by washing it in water and detergent.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter must always be replaced.

A HUSQVARNA chain saw can be equipped with different types of air filters according to working conditions, weather, season, etc. Contact your dealer for advice.

English – 33

Image 33
Contents Operator’s manual 336 EPA KEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Chain catcher Throttle lockRight hand guard Vibration damping systemCutting equipment Stop switchMuffler General rulesCutting equipment designed to minimise kickback Sharpening your chain and adjusting depth gauge settingGeneral advice on adjusting depth gauge setting Adjustment of depth gauge settingSharpening cutting teeth Lubricating cutting equipment Tensioning the chainChain oil Filling with chain oilChain drive sprocket Checking chain lubricationNeedle bearing lubrication Checking wear on cutting equipmentBar Fitting the bar and chain AssemblyFuel Fuel HandlingFueling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsGeneral rules Basic cutting technique GeneralTerms Cutting LimbingSafe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreatDirectional cuts FellingFreeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionHow to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral High speed jet H Correctly adjusted carburetorChecking brake band wear Checking the front hand guardChecking the brake trigger Muffler StarterChanging a broken or worn starter cord Tensioning the recoil spring Air filterChanging a broken recoil spring Fitting the starterSpark plug Adjustment of the oil pumpLubricating the bar tip sprocket Cooling systemDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinations, modelYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSafety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautions1150146-95 ´z+R.e¶5/¨ ´z+R.e¶5/¨
Related manuals
Manual 57 pages 161 b

336 specifications

The Husqvarna 336 is a powerful and reliable chainsaw designed for both professional forestry work and demanding garden tasks. This versatile tool is ideal for users who value durability, performance, and ease of use. The 336 model stands out in the Husqvarna range thanks to its innovative features and cutting-edge technology.

One of the main highlights of the Husqvarna 336 is its efficient engine. Powered by a 34.6 cc, 2.6 kW engine, it strikes a balance between power and weight, ensuring that users can handle it comfortably during extended use. The X-Torq engine technology reduces fuel consumption and emissions, making it an environmentally-friendly option, while still delivering high performance.

The design of the Husqvarna 336 is crafted for maximum user comfort. The chainsaw features an ergonomic handle that ensures a secure and balanced grip, reducing fatigue during long periods of operation. Additionally, the lightweight design enhances maneuverability, allowing users to navigate through tight spaces and tackle challenging cuts with ease.

Safety is paramount in the design of the Husqvarna 336. The chainsaw is equipped with a quick-release air filter system, which makes maintenance simple and efficient. The chain brake works effectively to prevent accidents, and the chainsaw is fitted with a low-vibration system that minimizes vibrations felt by the user, improving overall comfort and control.

Another notable feature of the Husqvarna 336 is its intuitive controls, which allow users to quickly adjust settings and make necessary changes on the job. The model boasts an adjustable oil pump that lets users optimize chain lubrication based on the task at hand. This means improved efficiency and extended chain life, ultimately saving users both time and money.

The chainsaw also incorporates an easy-start mechanism, reducing the effort required to start the engine. This makes the Husqvarna 336 a practical choice for users of all skill levels, from seasoned professionals to beginners looking to tackle their first projects.

In summary, the Husqvarna 336 is a standout chainsaw that combines power, comfort, and advanced technology. Its features, including the X-Torq engine, ergonomic design, safety elements, and ease of maintenance, make it an excellent investment for anyone serious about forestry work or outdoor upkeep. Whether pruning trees, cutting firewood, or felling small trees, the Husqvarna 336 excels in performance and reliability, ensuring users get the job done efficiently and effectively.