Husqvarna YTH180 owner manual Before Starting the Engine, To Operate on Hills, ADD Gasoline

Page 12

OPERATION

TO OPERATE MOWER (See Fig. 11)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the mower clutch engaged will shut off the engine.

Select desired height of cut.

Lower mower with attachment lift control.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the dis- charge guard in place.

TO TRANSPORT (See Figs. 9 & 12)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

Raise attachment lift to highest position with attach- ment lift control.

Pull freewheel control knob out and hold in position by inserting retainer spring into forward hole of control rod.

Do not push or tow tractor at more than two (2) MPH.

To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

 

ATTACHMENT LIFT LEVER

ATTACHMENT CLUTCH

"HIGH" POSITION

SWITCH PULL OUT TO

 

"DISENGAGED"

"LOW"

 

 

POSITION

PUSH IN TO "ENGAGED"

DISCHARGE

GUARD

FIG. 11

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

To restart movement, slowly release parking brake and clutch/brake pedal.

Slowly move motion control lever to slowest setting.

Make all turns slowly.

12

FIG. 12

BEFORE STARTING THE ENGINE

CHECK ENGINE OIL LEVEL (See Fig. 13)

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

Check engine oil with tractor on level ground.

Remove oil fill cap/dipstick and wipe clean, reinsert the dipstick and push it all the way down into the tube, wait for a few seconds, remove and read oil level. If necessary, add oil until “FULL” mark on dipstick is reached. Do not overfill.

For cold weather operation you should change oil for easier starting (See “OIL VISCOSITY CHART” in the Customer Responsibilities section of this manual).

To change engine oil, see the Customer Responsibili- ties section in this manual.

OIL FILL CAP/DIPSTICK

OIL DRAIN PLUG

FIG. 13

ADD GASOLINE

Fill fuel tank. Use fresh, clean, regular unleaded gasoline. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life).

IMPORTANT: WHEN OPERATING IN TEMPERATURES BELOW 32°F(0°C), USE FRESH, CLEAN WINTER GRADE GASOLINE TO HELP INSURE GOOD COLD WEATHER STARTING.

Image 12
Contents YTH180 IV. Service Safe Operation Practices for Ride-On MowersGeneral Operation II. Slope OperationProduct Specifications Customer ResponsibilitiesModel Number YTH180 Serial Table of Contents Contents of Hardware Pack Assembly Tools Required for AssemblyTo Remove Tractor from Carton Before Rolling Tractor OFF SkidHOW to SET UP Your Tractor Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL BeltsInstall Battery See Figs To Attach Front Bumper See FigInstall Mulcher Plate See Figs a & 8B Assemble Gauge Wheels to Mower Deck See FigTo Convert to Bagging or Discharging Operation Know Your TractorHOW to USE Your Tractor Before Starting the Engine To Operate on HillsADD Gasoline Indicator Lights To Start Engine See FigPurge Transmission Mowing Tips Mulching Mowing TipsLubrication Chart Service DatesCustomer Responsibilities General RecommendationsTractor Brake OperationTires Blade CareEngine BeltsTransaxle Cooling Transaxle Pump FluidCleaning Engine OIL FilterMuffler Spark PlugsService and Adjustments To Install Mower See FigTo Remove Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsTo Adjust Attachment Clutch See Fig To Adjust Brake See FigBelt Installation To Replace Mower Blade Drive Belt See FigTo Adjust Motion Control Lever See Fig Transmission REMOVAL/REPLACEMENTTo Replace Motion Drive Belt See Fig To Adjust Steering Wheel Alignment To Start Engine with a Weak Battery See FigFront Wheel TOE-IN/CAMBER To Remove Wheel for Repairs See FigTo Replace Fuse To Replace Headlight BulbInterlocks and Relays Acceleration Test Storage OtherTroubleshooting Points Problem Cause CorrectionOFF Schematic Indicator LightsIgnition Switch Wiring Insulated Clips PTO SwitchRepair Parts ElectricalKEY Part NO. NO. Description Chassis and Enclosures KEY Part NO. no Description Drive KEY Part Description Steering Assembly KEY Part NO. no Description Seat Assembly 118 HP 42 Tractor Model NO. YTH180 954001172AWheels & Tires LBD48LSB42 Optional Equipment Engine Mower Lift Assembly KEY Part NO. NO. Description Mower KEY Part NO. no Description HYDRO-GEAR Transaxle - Model Number Repair Parts Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Sighting GuideWarranty Statement Perimeter Woods DriveCHARLOTTE, North Carolina 532145464

YTH180 specifications

The Husqvarna YTH180 is a well-regarded lawn tractor designed for residential use, appealing to homeowners seeking efficiency and ease in lawn care. Known for its reliability and solid performance, the YTH180 combines power, comfort, and a user-friendly experience to tackle various yard tasks.

At the heart of the YTH180 is a robust 18 horsepower Kohler engine, which provides ample power for even the most daunting lawn maintenance chores. This engine is designed to deliver consistent performance with minimal maintenance, ensuring that users can focus on mowing rather than troubleshooting engine issues. The automatic transmission enables smooth shifting, allowing users to navigate their properties with ease and precision.

One of the standout features of the Husqvarna YTH180 is its 42-inch cutting deck, which provides an excellent balance between maneuverability and cutting efficiency. The cutting deck has several adjustable heights, allowing operators to customize their mowing experience based on grass conditions and lawn preferences. Additionally, the deck is reinforced for durability, ensuring that it can withstand the rigors of frequent use.

The YTH180 also incorporates advanced technologies that enhance the user experience. Its ergonomic steering wheel and comfortable seat ensure that operators can mow for extended periods without discomfort. The foot-operated deck lift makes it easy to adjust the cutting height on the fly, increasing efficiency and convenience.

Storage and transportation are simplified with a compact design, making it easy to fit the YTH180 in standard garages or storage sheds. The tractor's tight turning radius allows for easier maneuvering around flower beds, trees, and other obstacles in the yard.

For those who want to maintain their yards year-round, optional attachments such as snow plows, mulching kits, and bagging systems can expand the YTH180's functionality, turning it into a versatile tool for various outdoor tasks.

In summary, the Husqvarna YTH180 lawn tractor is an excellent choice for homeowners who prioritize performance, efficiency, and comfort in their lawn care efforts. With a powerful engine, a durable cutting deck, and thoughtful ergonomic features, the YTH180 stands out as a reliable partner in maintaining a beautiful lawn. Its combination of technology and user-friendly design makes it suitable for a wide range of lawn care needs.