Husqvarna YTH180 owner manual Storage, Other

Page 26

STORAGE

Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more.

CAUTION: Never store the tractor with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TRACTOR

Remove mower from tractor for winter storage. When mower is to be stored for a period of time, clean it thor- oughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

•Clean entire tractor (See “CLEANING” in the Customer Responsibilities section of this manual).

•Inspect and replace belts, if necessary (See belt re- placement instructions in the Service and Adjustments section of this manual).

•Lubricate as shown in the Customer Responsibilities section of this manual.

•Be sure that all nuts, bolts and screws are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

•Touch up all rusted or chipped paint surfaces; sand lightly before painting.

BATTERY

•Fully charge the battery for storage.

•After a period of time in storage, battery may require recharging.

•To help prevent corrosion and power leakage during long periods of storage, battery cables should be disconnected and battery cleaned thoroughly (see “TO CLEAN BATTERY AND TERMINALS” in the Cus- tomer Responsibilities section of this manual).

•After cleaning, leave cables disconnected and place cables where they cannot come in contact with battery terminals.

•Be sure battery drain tube is securely attached.

•If battery is removed from tractor for storage, do not store battery directly on concrete or damp surfaces.

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALSO, EXPERIENCE INDICATES THAT ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

•Drain the fuel tank.

•Start the engine and let it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during stor- age. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not drain the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See “ENGINE” in the Customer Responsibilities section of this manual).

CYLINDERS

•Remove spark plug(s).

•Pour one ounce of oil through spark plug hole(s) into cylinder(s).

•Turn ignition key to “START” position for a few seconds to distribute oil.

•Replace with new spark plug(s).

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your tractor indoors and cover it to give protection from dust and dirt.

•Cover your tractor with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe which allows condensation to form and will cause your tractor to rust.

IMPORTANT: NEVER COVER TRACTOR WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents YTH180 General Operation IV. ServiceSafe Operation Practices for Ride-On Mowers II. Slope OperationModel Number YTH180 Serial Product SpecificationsCustomer Responsibilities Table of Contents Contents of Hardware Pack To Remove Tractor from Carton AssemblyTools Required for Assembly Before Rolling Tractor OFF SkidCheck Deck Levelness HOW to SET UP Your TractorCheck Tire Pressure Check for Proper Position of ALL BeltsInstall Battery See Figs To Attach Front Bumper See FigTo Convert to Bagging or Discharging Install Mulcher Plate See Figs a & 8BAssemble Gauge Wheels to Mower Deck See Fig Operation Know Your TractorHOW to USE Your Tractor ADD Gasoline Before Starting the EngineTo Operate on Hills Purge Transmission Indicator LightsTo Start Engine See Fig Mowing Tips Mulching Mowing TipsCustomer Responsibilities Lubrication ChartService Dates General RecommendationsTires TractorBrake Operation Blade CareTransaxle Cooling EngineBelts Transaxle Pump FluidMuffler CleaningEngine OIL Filter Spark PlugsTo Remove Mower See Fig Service and AdjustmentsTo Install Mower See Fig To Level Mower Housing FRONT-TO-BACK Adjustment See FigsBelt Installation To Adjust Attachment Clutch See FigTo Adjust Brake See Fig To Replace Mower Blade Drive Belt See FigTo Replace Motion Drive Belt See Fig To Adjust Motion Control Lever See FigTransmission REMOVAL/REPLACEMENT Front Wheel TOE-IN/CAMBER To Adjust Steering Wheel AlignmentTo Start Engine with a Weak Battery See Fig To Remove Wheel for Repairs See FigInterlocks and Relays To Replace FuseTo Replace Headlight Bulb Acceleration Test Storage OtherTroubleshooting Points Problem Cause CorrectionOFF Ignition Switch SchematicIndicator Lights Wiring Insulated Clips PTO SwitchRepair Parts ElectricalKEY Part NO. NO. Description Chassis and Enclosures KEY Part NO. no Description Drive KEY Part Description Steering Assembly KEY Part NO. no Description Seat Assembly 118 HP 42 Tractor Model NO. YTH180 954001172ALSB42 Wheels & TiresLBD48 Optional Equipment Engine Mower Lift Assembly KEY Part NO. NO. Description Mower KEY Part NO. no Description HYDRO-GEAR Transaxle - Model Number Repair Parts Service Notes Service Notes Suggested Guide for Sighting Slopes for Safe Operation Sighting GuideCHARLOTTE, North Carolina Warranty StatementPerimeter Woods Drive 532145464

YTH180 specifications

The Husqvarna YTH180 is a well-regarded lawn tractor designed for residential use, appealing to homeowners seeking efficiency and ease in lawn care. Known for its reliability and solid performance, the YTH180 combines power, comfort, and a user-friendly experience to tackle various yard tasks.

At the heart of the YTH180 is a robust 18 horsepower Kohler engine, which provides ample power for even the most daunting lawn maintenance chores. This engine is designed to deliver consistent performance with minimal maintenance, ensuring that users can focus on mowing rather than troubleshooting engine issues. The automatic transmission enables smooth shifting, allowing users to navigate their properties with ease and precision.

One of the standout features of the Husqvarna YTH180 is its 42-inch cutting deck, which provides an excellent balance between maneuverability and cutting efficiency. The cutting deck has several adjustable heights, allowing operators to customize their mowing experience based on grass conditions and lawn preferences. Additionally, the deck is reinforced for durability, ensuring that it can withstand the rigors of frequent use.

The YTH180 also incorporates advanced technologies that enhance the user experience. Its ergonomic steering wheel and comfortable seat ensure that operators can mow for extended periods without discomfort. The foot-operated deck lift makes it easy to adjust the cutting height on the fly, increasing efficiency and convenience.

Storage and transportation are simplified with a compact design, making it easy to fit the YTH180 in standard garages or storage sheds. The tractor's tight turning radius allows for easier maneuvering around flower beds, trees, and other obstacles in the yard.

For those who want to maintain their yards year-round, optional attachments such as snow plows, mulching kits, and bagging systems can expand the YTH180's functionality, turning it into a versatile tool for various outdoor tasks.

In summary, the Husqvarna YTH180 lawn tractor is an excellent choice for homeowners who prioritize performance, efficiency, and comfort in their lawn care efforts. With a powerful engine, a durable cutting deck, and thoughtful ergonomic features, the YTH180 stands out as a reliable partner in maintaining a beautiful lawn. Its combination of technology and user-friendly design makes it suitable for a wide range of lawn care needs.
Top Page Image Contents