Husqvarna MZ6125 / 968999718, MZ6125C / 968999749, MZ6125BF / 968999721 Safe Handling of Gasoline

Page 13

SAFETY

WARNING!

The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed.

Safe Handling of Gasoline

To avoid personal injury or property damage, use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive.

•Extinguish all cigarettes, cigars, pipes, and other sources of ignition.

•Use only approved gasoline container.

•Never remove gas cap or add fuel with the engine running. Allow engine to cool at least two (2) minutes before refueling.

•Never fuel the machine indoors.

•Never store the machine or fuel container where there is an open flame, spark, or pilot light such as on a water heater or other appliance.

•Before you begin refueling, minimize the risk of static electricity by touching a metal surface.

•Never fill containers inside a vehicle or on a truck or trailer bed with plastic liner. Always place containers on the ground away from the vehicle when filling.

•Remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment with a portable container, rather than from a gasoline dispenser nozzle.

•Keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock-open device.

•If fuel is spilled on clothing, change clothing immediately.

•Never overfill fuel tank. Replace gas cap and tighten securely.

•Do not start the engine near spilled fuel.

•Never use gasoline as a cleaning agent.

•If leaks arise in fuel system, engine must not be started until problem has been resolved.

•Check the fuel level before each use and leave space for the fuel to expand, as the heat from the engine and the sun may otherwise cause the fuel to expand and overflow.

8011-516

Never fill the fuel tank indoors

WARNING!

The engine and the exhaust system become very hot during operation.

There is risk for burns if touched.

Allow engine and exhaust system to cool at least two (2) minutes before refueling.

English-13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operators Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Moving sharp blades under cover General Operation SafetyNever take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Roll over Protection system Rops Control Locations ControlsSteering Control Levers Parking Brake Blade SwitchThrottle Control Choke Control Ignition SwitchFuses Fuel Tank Lifting Lever for the Mower Deck Fuel Shut Off ValveHour Meter Seat Adjustment LeverTracking Knob Steering TrainingStarting the Engine Before StartingPress the control for disengaging the mower deck Set the choke control Release ignition to the RUN position To attach jumper cables Starting the engine with a weak batteryTo remove cables, reverse order Running Ensure that no one is near mower when engaging blade switchOperating on hills Mowing Tips Stopping the Engine Pump release valves Maintenance Schedule MaintenanceDaily Weekly Maintenance interval Least Hours Once Maintenance Before AfterEnglish-37 To clean battery and terminals BatteryReplacing battery Ignition System Safety SystemThrottle Cable Engine Cooling Air IntakeChoke Cable Servicing Precleaner Air Filter MaintenanceReplacing Air Filter Servicing Paper ElementFuel Pump Air Filter Replacing the Fuel FilterTire Pressures Belts Deck belt Deck belt installationDeck belt removal Pump Belt Belt installationCutting Blades Replacing pump beltBlade replacement Leveling deck Adjusting the Mower DeckAnti-scalp rollers Removal and installation of caster wheel Cleaning and WashingCaster Wheels HardwareChange transaxles transmission filters General LubricationLubricating the Cables LubricationFront Wheel Mount Front Wheel BearingsEngine Oil Filter Engine OilChanging the Engine Oil Never fill to above the Full mark Engine Oil LevelsHydraulic Pump Purging ProceduresFluid Change Problem Cause TroubleshootingEnglish-56 Storage ServiceStorage Winter StorageSchematics MZ5225 MZ6125 MZ5225BF MZ6125BF Engine MZ5225C MZ6125C Technical DataTransmission MZ5225 MZ6125 MZ5225BF MZ6125BF MZ5225C MZ6125C Overall DimensionsProductivity MZ7227 MZ25 Engine MZ7227 MZ25 Torque Specifications AccessoriesMetric Standard Hardware Standard HardwareCE requirements USA requirementsDelivery Service Service JournalAction Date, mtr reading, stamp, sign After the First 5-8 Hours Hour Service English-69 English-70 English-71 At Least Once Each Year English-73 English-74 Page Warranty Statement 539 132401 R01 03/27/08

MZ6125, MZ7227, MZ5225BF, MZ6125BF, MZ5225C, MZ6125C, MZ25, MZ5225, MZ5225 / 968999717, MZ25 / 968999780, MZ5225C / 968999748, MZ6125 / 968999718 specifications

Husqvarna, a name synonymous with outdoor power equipment, has produced a range of high-performance zero-turn mowers that cater to both residential and commercial users. The models MZ7227 (968999719), MZ6125C (968999749), MZ25 (968999780), MZ6125BF (968999721), and MZ6125 (968999718) stand out for their exceptional engineering, innovative technologies, and user-focused features.

The Husqvarna MZ7227 is a robust zero-turn mower powered by a durable engine designed for high-performance mowing. Its 27 horsepower engine provides ample power for tackling tough grass and uneven terrain. The MZ6125C and MZ6125, both equipped with a 25 horsepower engine, offer a balance of efficiency and performance, making them suitable for both residential and light commercial applications. The MZ25, though compact, boasts a solid build and competent power delivery, perfect for those with smaller lawns.

One of the notable features across these models is the cutting deck. They come with a heavy-duty fabricated cutting deck that ensures a professional-looking finish. The innovative air induction technology enhances airflow within the deck, resulting in even grass cutting. Users will appreciate the ability to adjust the cutting height easily, accommodating various lawn types.

Comfort is also a priority in Husqvarna's design. These mowers boast high-back seats with armrests designed for extended use without sacrificing comfort. The ergonomic controls are intuitively placed, allowing for efficient operation. The models are equipped with a foot-operated deck lift, making height adjustments quick and hassle-free.

Another critical feature is the hydrostatic transmission. This technology allows for smooth and straightforward speed adjustments, offering exceptional maneuverability when navigating around obstacles. The zero-turn radius design is excellent for achieving precise turns, making mowing around trees and flower beds effortless.

In terms of durability, Husqvarna has built these mowers with premium materials, ensuring longevity and reliability even under strenuous conditions. The reinforced chassis and heavy-duty wheels provide stability, contributing to the overall handling of the machines.

Lastly, maintenance is straightforward with these mowers. Accessible maintenance points and a belt-driven transmission reduce wear and tear, extending the life of the machine. With their combination of power, performance, and user-oriented features, the Husqvarna MZ series mowers, including the MZ7227, MZ6125C, MZ25, MZ6125BF, and MZ6125, are excellent choices for anyone looking to invest in quality lawn care equipment. They promise to deliver superior cutting performance and a comfortable mowing experience for every user.
Top Page Image Contents