Husqvarna MZ6125, MZ7227, MZ5225BF, MZ6125BF, MZ5225C, MZ6125C, MZ25, MZ5225 manual Deck belt

Page 44

MAINTENANCE

Deck belt

Deck belt removal

Park on a level surface. Apply park brake.Lower the deck into the lowest cutting position.

1.Remove foot plate and belt shields.

2.Using a ratchet with a 9/16” socket on the spring idler bolt to relieve the tension on the belt.

3.Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface.

4.Carefully roll the belt over the top of the cutter housing pulleys.

5.Remove the belt from around the electric clutch on the engine shaft.

6.The belt can now be removed.

Deck belt installation

NOTE: For ease in installing the deck belt, refer to the routing decal on bottom of seat.

1.

Wrap the deck belt around the electric clutch

 

pulley that is located on the engine shaft.

2.

Route the belt forward between and up onto

 

the deck.

3.

Place belt around spring loaded idler pulley.

4.

Wrap the belt around the stationary idler

 

pulley and around the mandrel housings.

5.

Push inward on the idler arm and carefully

 

route belt over stationary idler pulley. Once

 

belt is properly routed, slowly release idler

 

arm to tension belt.

6.

Double check belt routing to make sure it

 

matches the routing decal, and the belt does

 

not have any twist. Correct as needed.

7.

Adjust tension.

8.

Replace belt shields on both mandrel

8011-622

Slackening the belt tensioner

1

2

7

4

63

5

housings and secure with fasteners.

Belt routing, deck belt

8011-580

English-44

Image 44
Contents Operators Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Moving sharp blades under cover Safety General OperationNever take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Roll over Protection system Rops Controls Control LocationsSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Fuel Shut Off Valve Lifting Lever for the Mower DeckTracking Knob Seat Adjustment LeverHour Meter Training SteeringBefore Starting Starting the EnginePress the control for disengaging the mower deck Set the choke control Release ignition to the RUN position To remove cables, reverse order Starting the engine with a weak batteryTo attach jumper cables Ensure that no one is near mower when engaging blade switch RunningOperating on hills Mowing Tips Stopping the Engine Pump release valves Maintenance Maintenance ScheduleDaily Weekly Maintenance interval Least Hours Once Maintenance Before AfterEnglish-37 Replacing battery BatteryTo clean battery and terminals Safety System Ignition SystemChoke Cable Engine Cooling Air IntakeThrottle Cable Air Filter Maintenance Servicing PrecleanerReplacing Air Filter Servicing Paper ElementTire Pressures Replacing the Fuel FilterFuel Pump Air Filter Belts Deck belt removal Deck belt installationDeck belt Belt installation Pump BeltCutting Blades Replacing pump beltBlade replacement Adjusting the Mower Deck Leveling deckAnti-scalp rollers Cleaning and Washing Removal and installation of caster wheelCaster Wheels HardwareLubrication Change transaxles transmission filters GeneralLubrication Lubricating the CablesFront Wheel Mount Front Wheel BearingsChanging the Engine Oil Engine OilEngine Oil Filter Engine Oil Levels Never fill to above the Full markFluid Change Purging ProceduresHydraulic Pump Troubleshooting Problem CauseEnglish-56 Service StorageStorage Winter StorageSchematics Transmission Technical DataMZ5225 MZ6125 MZ5225BF MZ6125BF Engine MZ5225C MZ6125C Productivity Overall DimensionsMZ5225 MZ6125 MZ5225BF MZ6125BF MZ5225C MZ6125C MZ7227 MZ25 Engine MZ7227 MZ25 Accessories Torque SpecificationsStandard Hardware Metric Standard HardwareUSA requirements CE requirementsAction Date, mtr reading, stamp, sign Service JournalDelivery Service After the First 5-8 Hours Hour Service English-69 English-70 English-71 At Least Once Each Year English-73 English-74 Page Warranty Statement 539 132401 R01 03/27/08

MZ6125, MZ7227, MZ5225BF, MZ6125BF, MZ5225C, MZ6125C, MZ25, MZ5225, MZ5225 / 968999717, MZ25 / 968999780, MZ5225C / 968999748, MZ6125 / 968999718 specifications

Husqvarna, a name synonymous with outdoor power equipment, has produced a range of high-performance zero-turn mowers that cater to both residential and commercial users. The models MZ7227 (968999719), MZ6125C (968999749), MZ25 (968999780), MZ6125BF (968999721), and MZ6125 (968999718) stand out for their exceptional engineering, innovative technologies, and user-focused features.

The Husqvarna MZ7227 is a robust zero-turn mower powered by a durable engine designed for high-performance mowing. Its 27 horsepower engine provides ample power for tackling tough grass and uneven terrain. The MZ6125C and MZ6125, both equipped with a 25 horsepower engine, offer a balance of efficiency and performance, making them suitable for both residential and light commercial applications. The MZ25, though compact, boasts a solid build and competent power delivery, perfect for those with smaller lawns.

One of the notable features across these models is the cutting deck. They come with a heavy-duty fabricated cutting deck that ensures a professional-looking finish. The innovative air induction technology enhances airflow within the deck, resulting in even grass cutting. Users will appreciate the ability to adjust the cutting height easily, accommodating various lawn types.

Comfort is also a priority in Husqvarna's design. These mowers boast high-back seats with armrests designed for extended use without sacrificing comfort. The ergonomic controls are intuitively placed, allowing for efficient operation. The models are equipped with a foot-operated deck lift, making height adjustments quick and hassle-free.

Another critical feature is the hydrostatic transmission. This technology allows for smooth and straightforward speed adjustments, offering exceptional maneuverability when navigating around obstacles. The zero-turn radius design is excellent for achieving precise turns, making mowing around trees and flower beds effortless.

In terms of durability, Husqvarna has built these mowers with premium materials, ensuring longevity and reliability even under strenuous conditions. The reinforced chassis and heavy-duty wheels provide stability, contributing to the overall handling of the machines.

Lastly, maintenance is straightforward with these mowers. Accessible maintenance points and a belt-driven transmission reduce wear and tear, extending the life of the machine. With their combination of power, performance, and user-oriented features, the Husqvarna MZ series mowers, including the MZ7227, MZ6125C, MZ25, MZ6125BF, and MZ6125, are excellent choices for anyone looking to invest in quality lawn care equipment. They promise to deliver superior cutting performance and a comfortable mowing experience for every user.