Husqvarna MZ7227 / 968999719 manual Battery, To clean battery and terminals, Replacing battery

Page 38

MAINTENANCE

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

Recharge at 6-10 amperes for 1 hour

To clean battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Open the terminal access doors.

2.Disconnect BLACK battery cable first, then the

RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

Replacing battery

1.Lift seat and rotate forward.

2.Open terminal access doors

3.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

4.Using a 7/16 wrench, remove the bolts on either side of the terminal guard and lift off guard.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery terminal guard.

8.First connect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and hex nut.

10.Close access doors.

11.Lower seat.

Always use protective glasses when handling the battery.

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

2

1

CZ-22

1.Terminal guard

2.Access doors

Battery cleaning and installation

English-38

Image 38
Contents Operators Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Moving sharp blades under cover Safety General OperationNever take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Roll over Protection system Rops Controls Control LocationsSteering Control Levers Throttle Control Blade SwitchParking Brake Fuses Ignition SwitchChoke Control Fuel Tank Fuel Shut Off Valve Lifting Lever for the Mower DeckTracking Knob Seat Adjustment LeverHour Meter Training SteeringBefore Starting Starting the EnginePress the control for disengaging the mower deck Set the choke control Release ignition to the RUN position To remove cables, reverse order Starting the engine with a weak batteryTo attach jumper cables Ensure that no one is near mower when engaging blade switch RunningOperating on hills Mowing Tips Stopping the Engine Pump release valves Daily Weekly Maintenance interval Least Hours Once MaintenanceMaintenance Schedule Maintenance Before AfterEnglish-37 Replacing battery BatteryTo clean battery and terminals Safety System Ignition SystemChoke Cable Engine Cooling Air IntakeThrottle Cable Replacing Air Filter Air Filter MaintenanceServicing Precleaner Servicing Paper ElementTire Pressures Replacing the Fuel FilterFuel Pump Air Filter Belts Deck belt removal Deck belt installationDeck belt Cutting Blades Belt installationPump Belt Replacing pump beltBlade replacement Adjusting the Mower Deck Leveling deckAnti-scalp rollers Caster Wheels Cleaning and WashingRemoval and installation of caster wheel HardwareLubrication Change transaxles transmission filters GeneralFront Wheel Mount LubricationLubricating the Cables Front Wheel BearingsChanging the Engine Oil Engine OilEngine Oil Filter Engine Oil Levels Never fill to above the Full markFluid Change Purging ProceduresHydraulic Pump Troubleshooting Problem CauseEnglish-56 Storage ServiceStorage Winter StorageSchematics Transmission Technical DataMZ5225 MZ6125 MZ5225BF MZ6125BF Engine MZ5225C MZ6125C Productivity Overall DimensionsMZ5225 MZ6125 MZ5225BF MZ6125BF MZ5225C MZ6125C MZ7227 MZ25 Engine MZ7227 MZ25 Accessories Torque SpecificationsStandard Hardware Metric Standard HardwareUSA requirements CE requirementsAction Date, mtr reading, stamp, sign Service JournalDelivery Service After the First 5-8 Hours Hour Service English-69 English-70 English-71 At Least Once Each Year English-73 English-74 Page Warranty Statement 539 132401 R01 03/27/08

MZ6125, MZ7227, MZ5225BF, MZ6125BF, MZ5225C, MZ6125C, MZ25, MZ5225, MZ5225 / 968999717, MZ25 / 968999780, MZ5225C / 968999748, MZ6125 / 968999718 specifications

Husqvarna, a name synonymous with outdoor power equipment, has produced a range of high-performance zero-turn mowers that cater to both residential and commercial users. The models MZ7227 (968999719), MZ6125C (968999749), MZ25 (968999780), MZ6125BF (968999721), and MZ6125 (968999718) stand out for their exceptional engineering, innovative technologies, and user-focused features.

The Husqvarna MZ7227 is a robust zero-turn mower powered by a durable engine designed for high-performance mowing. Its 27 horsepower engine provides ample power for tackling tough grass and uneven terrain. The MZ6125C and MZ6125, both equipped with a 25 horsepower engine, offer a balance of efficiency and performance, making them suitable for both residential and light commercial applications. The MZ25, though compact, boasts a solid build and competent power delivery, perfect for those with smaller lawns.

One of the notable features across these models is the cutting deck. They come with a heavy-duty fabricated cutting deck that ensures a professional-looking finish. The innovative air induction technology enhances airflow within the deck, resulting in even grass cutting. Users will appreciate the ability to adjust the cutting height easily, accommodating various lawn types.

Comfort is also a priority in Husqvarna's design. These mowers boast high-back seats with armrests designed for extended use without sacrificing comfort. The ergonomic controls are intuitively placed, allowing for efficient operation. The models are equipped with a foot-operated deck lift, making height adjustments quick and hassle-free.

Another critical feature is the hydrostatic transmission. This technology allows for smooth and straightforward speed adjustments, offering exceptional maneuverability when navigating around obstacles. The zero-turn radius design is excellent for achieving precise turns, making mowing around trees and flower beds effortless.

In terms of durability, Husqvarna has built these mowers with premium materials, ensuring longevity and reliability even under strenuous conditions. The reinforced chassis and heavy-duty wheels provide stability, contributing to the overall handling of the machines.

Lastly, maintenance is straightforward with these mowers. Accessible maintenance points and a belt-driven transmission reduce wear and tear, extending the life of the machine. With their combination of power, performance, and user-oriented features, the Husqvarna MZ series mowers, including the MZ7227, MZ6125C, MZ25, MZ6125BF, and MZ6125, are excellent choices for anyone looking to invest in quality lawn care equipment. They promise to deliver superior cutting performance and a comfortable mowing experience for every user.