Adjusting the Mower Deck

MAINTENANCE

WARNING!

Before performing any service or adjustment checklist:

1.Engage the parking brake.

2.Place the Blade switch in the disengaged position.

3.Turn ignition switch to “OFF” position and remove the key.

4.Make sure the blades and all moving parts have completely stopped.

5.Disconnect the spark plug wire from all spark plugs and place the wire where it cannot come in contact with the plug.

Check the tire pressure before adjustment of the mower deck. See “Checking Tire Pressure” in Maintenance section. Faulty mower deck adjustments will cause an uneven mowing result.

Leveling deck

Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure. See “Technical Data” under Transmission. If tires are under or over inflated, you cannot properly adjust your deck.

Four slots control the height and pitch of the mower deck. The deck should be adjusted slightly higher in the rear.

NOTE:To insure accuracy of leveling procedure, mower deck drive belt must be installed prior to leveling deck.

1.Wear heavy gloves. Turn each outer blade tip to align with the deck or in a side-to-side manner.

2.Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower deck. Retain this measurement. Move to the opposite side, check that measurement is the same. If adjustment

is required, loosen the locknut and move mounting bolt up or down in slot until both side-to-side measurements are equal. Retain measurement.

3.Turn both outer blades to align with the deck in front-to-rear manner. Reposition rear mounting bolts up or down until rear of mower deck is positioned level to 1/8" higher in the rear than the side-to-side measurement.

WARNING!

Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.

	2
3	1
	1
	4
	8011-601-1

1.Front lift arm

2.Chain

3.Rear lift arm

4.Slotted deck hanger plates

Leveling the mower deck

English-47

MZ6125, MZ7227, MZ5225BF, MZ6125BF, MZ5225C, MZ6125C, MZ25, MZ5225, MZ5225 / 968999717, MZ25 / 968999780, MZ5225C / 968999748, MZ6125 / 968999718 specifications

Husqvarna, a name synonymous with outdoor power equipment, has produced a range of high-performance zero-turn mowers that cater to both residential and commercial users. The models MZ7227 (968999719), MZ6125C (968999749), MZ25 (968999780), MZ6125BF (968999721), and MZ6125 (968999718) stand out for their exceptional engineering, innovative technologies, and user-focused features.

The Husqvarna MZ7227 is a robust zero-turn mower powered by a durable engine designed for high-performance mowing. Its 27 horsepower engine provides ample power for tackling tough grass and uneven terrain. The MZ6125C and MZ6125, both equipped with a 25 horsepower engine, offer a balance of efficiency and performance, making them suitable for both residential and light commercial applications. The MZ25, though compact, boasts a solid build and competent power delivery, perfect for those with smaller lawns.

One of the notable features across these models is the cutting deck. They come with a heavy-duty fabricated cutting deck that ensures a professional-looking finish. The innovative air induction technology enhances airflow within the deck, resulting in even grass cutting. Users will appreciate the ability to adjust the cutting height easily, accommodating various lawn types.

Comfort is also a priority in Husqvarna's design. These mowers boast high-back seats with armrests designed for extended use without sacrificing comfort. The ergonomic controls are intuitively placed, allowing for efficient operation. The models are equipped with a foot-operated deck lift, making height adjustments quick and hassle-free.

Another critical feature is the hydrostatic transmission. This technology allows for smooth and straightforward speed adjustments, offering exceptional maneuverability when navigating around obstacles. The zero-turn radius design is excellent for achieving precise turns, making mowing around trees and flower beds effortless.

In terms of durability, Husqvarna has built these mowers with premium materials, ensuring longevity and reliability even under strenuous conditions. The reinforced chassis and heavy-duty wheels provide stability, contributing to the overall handling of the machines.

Lastly, maintenance is straightforward with these mowers. Accessible maintenance points and a belt-driven transmission reduce wear and tear, extending the life of the machine. With their combination of power, performance, and user-oriented features, the Husqvarna MZ series mowers, including the MZ7227, MZ6125C, MZ25, MZ6125BF, and MZ6125, are excellent choices for anyone looking to invest in quality lawn care equipment. They promise to deliver superior cutting performance and a comfortable mowing experience for every user.