Husqvarna LZ5225TKAA, LZ6123TLKOA, LZ6125TKAA, LZ6127TKOA, LZ7227TKOA manual Blade switch, Fuses

Page 20

CONTROLS

5. Blade switch

In order to engage the mower deck, pull the knob out; the mower blades are disengaged when the knob is depressed.

6. Ignition Switch

The ignition key is placed on the driver’s panel and is used to start and stop the engine.

IMPORTANT INFORMATION

Do not run the starter for more than five seconds each time. If the engine does not start, wait about 10 seconds before re- trying.

7. Fuses

The fuses are located in a holder to the left of the hydraulic tank. They are flat pin fuses of the same type used in automobiles.

There are three fuses, as well as socket for one spare fuse.

Fuse ratings and functions:

•20 A, Primary fuse.

•7.5 A, Mower deck coupling.

•7.5 A, Accessory outlet

•Socket for spare fuse.

8011-510

Blade Switch

8011-521

Ignition key and hour meter

8011-746

Fuses

English-18

Image 20

Contents Operator´s manual Page Contents OPERATOR’S Manual Rider LZ SeriesEnglish-2 Introduction IntroductionGood Service Manufacturing NumberXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Symbols and DecalsSymbols and Decals Passengers General Use Safety InstructionsSafety Instructions Hearing Do not Driving on SlopesDo as follows Children Maintenance Risk of sparking Use protective glasses for maintenance work TransportRoll over Protecion system Rops Customer responsibilitiesControls Control LocationsMotion Control Levers Parking Brake Hour MeterTracking knob Fuses Blade switchIgnition Switch Seat Locking Device RefuelingChoke Control Seat Adjustment LeverFuel Shut Off Valve Throttle Control Lifting Lever for the Mower DeckCutting height pedal AccessoriesPump release valves Training OperationOperation Starting the Engine Roll bar and safety beltBefore Starting Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Parking brake activatedMaintenance Schedule MaintenanceMaintenance English-35 Replacing battery BatteryTo clean battery and terminals Ignition System Checking the Safety System Safety system Checking the Engines Cooling Air Intake Checking and Adjusting Throttle CableChecking and Adjusting the Choke Cable Cyclon air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterFaulty adjustment can cause an accident Checking Tire PressuresChecking the Parking Brake Checking the V-beltsPump belt Always use protective gloves when handling the bladesChecking the Blades Remove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightTo adjust anti-scalp rollers Engine oil coolerCleaning and Washing Use protective glasses when cleaning and washingCaster Wheels HardwareLubrication Schedule LubricationLubrication Lubricating in Accordance with the Lubrication Schedule Lubricating the CablesShaft Bushings and Linkage Engine Oil, Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Recommendations Oil TypeEngine Oil, Kawasaki Engine Changing the Engine Oil Throttle and Choke Cables, Lever Bearings Front Wheel MountDeck belt pulleyes Mower Deck Height AdjusterFront Wheel Bearings Belt Adjuster, Mower Deck Mower Deck StrutsBrake Arms Changing the Oil Filter Problem Cause Trouble Shooting GuideTrouble Shooting Guide Water in the fuel English-63 Service StorageStorage Winter StorageWiring Diagrams Wiring diagramTechnical Data Technical DataProductivity LZ6127TKOA LZ7227TKOA Productivity Acres/h/20655 m2/h Acres/h/24300 m2/h Accessories Torque SpecificationsConformity Certificates USA requirementsService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signEnglish-73 Hour Service English-75 English-76 English-77 At Least Once Each Year English-79 110972R0107/26/05