LUBRICATION
9. Belt Adjuster, Mower Deck
Remove the foot plate (two screws) and lubricate with a grease gun, one zerk, until grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from
IMPORTANT INFORMATION
Use minimal lubrication and remove excess lubricant so that it does not come into contact with belts or belt pulley drive surfaces.
10. Steering Control Shafts
Tip the driver’s seat.
Lubricate with a grease gun, one zerk for each steering control shaft, until the grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from
11. Mower Deck Struts
Lubricate with a grease gun, one zerk for each strut, until the grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from
The belt adjuster grease nipple
Lubricating the steering control shafts
Lubricating struts