OPERATION
To start an engine with a weak battery
WARNING!
If your battery is too weak to start the engine, it should be recharged. (See “Battery” on page 36).
If “jumper cables” are used for emergency starting, follow this procedure:
IMPORTANT INFORMATION
Your mower is equipped with a
To attach jumper cables
• Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, taking care not to short against chassis.
•Connect one end of the BLACK cable to
the NEGATIVE
charged battery. | ||
Jumper cables connection | ||
|
•Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery.
To remove cables, reverse order
•Remove BLACK cable first from chassis and then from the fully charged battery.
•Remove RED cable last from both batteries.