Husqvarna LZ6123TLKOA (968999269), LZ6125TKAA (968999270) manual Lubrication Schedule

Page 52

LUBRICATION

Lubrication

Lubrication Schedule

 

 

8011-765

Lubrication schedule

 

 

12/12 Every year

Lubricate with grease gun

Lubricate with oil can

1/52 Every week

Oil change

Level check

1/365 Every day

 

 

 

Filter change

 

General

Remove the ignition key to prevent unintentional movements during lubrication.

When lubricating with an oil can, it must be filled with engine oil.

When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulfide grease.

For daily use, the machine should be lubricated twice weekly.

Wipe away excess grease after lubrication.

It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this happen, attempt to clean them with spirits. If the belt continues to slip after cleaning, it must be replaced. Gasoline or other petroleum products must not be used to clean belts.

English-50

Image 52
Contents Operator´s manual Page Contents OPERATOR’S Manual Rider LZ SeriesEnglish-2 Introduction IntroductionGood Service Manufacturing NumberSymbols and Decals Symbols and DecalsXxxxxxx xxxx xxxxxxxx xxx Xxxx xxxxxx Passengers Safety Instructions Safety InstructionsGeneral Use Hearing Do as follows Driving on SlopesDo not Children Maintenance Risk of sparking Use protective glasses for maintenance work TransportRoll over Protecion system Rops Customer responsibilitiesControls Control LocationsMotion Control Levers Tracking knob Hour MeterParking Brake Ignition Switch Blade switchFuses Seat Locking Device RefuelingFuel Shut Off Valve Seat Adjustment LeverChoke Control Throttle Control Lifting Lever for the Mower DeckPump release valves AccessoriesCutting height pedal Operation OperationTraining Before Starting Roll bar and safety beltStarting the Engine Disengage the mower blades by depressing the blade switch Press in and turn the ignition key to the start position USE Full Throttle When Mowing To start an engine with a weak battery To remove cables, reverse orderRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Parking brake activatedMaintenance MaintenanceMaintenance Schedule English-35 To clean battery and terminals BatteryReplacing battery Ignition System Checking the Safety System Safety system Checking and Adjusting the Choke Cable Checking and Adjusting Throttle CableChecking the Engines Cooling Air Intake Cyclon air filter maintenance Filter replacement Air filter indicator optionalReplacing the Fuel Filter Checking the Fuel Pump’s Air FilterFaulty adjustment can cause an accident Checking Tire PressuresChecking the Parking Brake Checking the V-beltsChecking the Blades Always use protective gloves when handling the bladesPump belt Remove blade bolt by turning counterclockwise Adjusting the Mower Deck Adjusting Cutting HeightTo adjust anti-scalp rollers Engine oil coolerCleaning and Washing Use protective glasses when cleaning and washingCaster Wheels HardwareLubrication LubricationLubrication Schedule Shaft Bushings and Linkage Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Engine Oil, Kohler Engine Changing the Engine Oil Checking the Oil Level Oil Recommendations Oil TypeEngine Oil, Kawasaki Engine Changing the Engine Oil Throttle and Choke Cables, Lever Bearings Front Wheel MountFront Wheel Bearings Mower Deck Height AdjusterDeck belt pulleyes Belt Adjuster, Mower Deck Mower Deck StrutsBrake Arms Changing the Oil Filter Trouble Shooting Guide Trouble Shooting GuideProblem Cause Water in the fuel English-63 Service StorageStorage Winter StorageWiring Diagrams Wiring diagramTechnical Data Technical DataProductivity LZ6127TKOA LZ7227TKOA Productivity Acres/h/20655 m2/h Acres/h/24300 m2/h Accessories Torque SpecificationsConformity Certificates USA requirementsService Journal Service JournalDelivery Service Action Date, mtr reading, stamp, signEnglish-73 Hour Service English-75 English-76 English-77 At Least Once Each Year English-79 110972R0107/26/05